Satisfaction guaranteed. Call us anytime: 1-877-880-TILE (8453).
Cart: 0 items, $0.00

Your shopping cart is empty.


Alpha ESC-150 Electric Stone Miter Cutting Kit



Alpha ESC-150 Electric Stone Miter Cutting Kit

One System for Straight, Curve and Miter Cuts

The ESC-150, which is equipped with a powerful motor capable cutting 1-1/4” (3cm) stone slabs in one pass. In addition, Alpha® recognized the need for a quality electric portable stone cutter that is capable of miter cutting of 1-1/4” (3cm) materials with ease, so that any stone fabricator can use it when miter cuts are required, without the time-consuming setup. Also, it is great for sink-hole cutting and groove-cutting for rodding applications.

Equipment Included: Side Handle, Screw (M6x30-Left), Flange-3, Water Hose Assembly (15ft / 4.5m), Water Quick Coupler w/ Shut-off Valve, Carbon Brush Set, Water Valve Assembly, SS Flat Head Screw (M4x10), Ground Fault Circuit Interrupter, End Cap, T-Handle Wrench, Open-End Wrench (17mm), Easy On-Easy Off Sleeve, Self-stick Felt Strip Set, Hex. Wrench (5mm


  • Powerful Motor For Use On Granite, Quartz Surfaces, Marble, Limestone, Concrete & Sintered/Porcelain Slabs
  • Capable of Miter Cutting 1-1/4” (3cm) Material w/Ease
  • Kink-Free Water Hose for Easy Maneuverability and Reducing Operator Fatigue
  • Great For Sink-Hole Cutting, Groove Cutting/Rodding
  • Comes with A Built in Dust Gate for Dustless Cutting When Connected to A HEPA Vacuum
  • Miter Cutting Kit available with ESC-150/ESC-250
  • One Year Tool Warranty*

Product Details

Model - ESC-150
Rating - 110 Volts
Amperage - 11.2A
Power - 1200W
No Load Speed (min-1) - 10,000 RPM
Weight - 11.30 lbs (5.12 kgs)
Arbor - 7/8" (22.23mm)
Cutting Disc Diameter - 6" (150mm)
Max. Cutting Depth - 2" (50.88mm)
Cord - 15ft (4.5m) Single Phase
Plug Type - A (110V)


Question: What kind of vacuum cleaner shall I use with ESC-150?
Answer: You need to use HEPA Vacuum according to OSHA’s Table 1. Please see link below for details.

Question: What is the warranty on the ESC-150?
Answer: One year warranty (See manual for details)

Question: Can I use the ASC-5CSM Carriage Assembly on the ESC-150?
Answer: No, you cannot use the ASC-5CSM Universal Carriage System due to the fact it is designed for ESC-125 which is a 5” stone cutter. The ESC-150 requires a larger carriage which is the ASC-6CSM.

Question: Why does the ESC-150 come with two locations for the anti-vibration side handle?
Answer: Alpha® provided two positional locations for the side handle for user comfort and stability during the cutting applications.

Question: When I use as a dry cutting application, dust breaches from the bottom of the stone. How can I prevent dust issue?
Answer: When a diamond blade cuts through the stone, dust will be kicked out from the bottom of the slab before it comes up to the surface of slab. You can put a substrate such as another stone slab or Styrofoam sheet to encapsulate the edge of diamond blade so that dust would be kicked up toward the point of a dust suction.

Question: Without TT Ruler Guide, how can I cut straight line?
Answer: You have two options if you would like to take an advantage of guide to cut straight line. One is to use the Alpha® Guide Rail and Carriage System. Another is using Alpha® Spike Ruler if the cut is less than 3ft.

Related Links

Alpha ESC-150 Stone Cutter Instruction manual


Chat with us Chat