Smiths Paint Green Clean Gel CleanerFrom: $89.95
Smith’s Paint Green Clean - Gel Cleaner
Available 2 and 5 Gallon
Approximately coverage per Gallon 250 sq ft
Smith's Green Clean is a non-corrosive biodegradable gel developed to prepare a concrete substrate by producing a moderate surface texture. From the machine troweled interior surfaces to smooth exterior slabs, Green Clean is the next generation in surface preparation.
Generic Type: Gel Cleaner
Smith's Green Clean is a non-corrosive biodegradable gel developed to prepare a concrete substrate by producing a moderate surface texture. From the machine troweled interior surfaces to smooth exterior slabs, Smith's Green Clean is the next generation in surface preparation.
This product not only reduces contractor labor, but also increases the adhesion of Smith's Decorative Concrete Products through proper surface preparation.
Remove paint, adhesives and loose particulates from the intended application surface. Amply apply Smiths Green Clean to the substrate with ½ inch nap roller cover. Allow the gel to remain on the substrate for 20 minutes. For exterior application, utilizing a 12,000 work units* pressure washer in conjunction with a 15 degree tip, remove the Smiths Green Clean with overlapping line patterns. For interior surface preparation, agitate Smiths Green Clean utilizing a floor buffer (small area) or an auto-scrubber (large area) with brush attachments while rinsing with clean water. Extract material utilizing a wet/dry vacuum or lower the uptake bar on the auto-scrubber. Continue to flush and agitate the substrate until the rinse water is clean. If additional profile is desired, reapply Smiths Green Clean following the previous directions. Allow surface to dry before application of Smith's Decorative Products.
- Produce a moderate texture on machine troweled concrete
- User friendly
- Low Odor
- Overnight Deliverable — no Red Label
Coverage per Gallon: 250 square feet
Note: Coverage depends on surface porosity, profile and application method.
Recommended Use: Preparation of a concrete surface for the application of Smith’s Color Floor, Color Wall and Color Accents.
Not recommended for: Coating removal including paint, sealer and other film forming products.