Warmup Snow and Ice Melting Outdoor Control - ODC-ASE-DS5C

Warmup Snow and Ice Melting Outdoor Control - ODC-ASE-DS5C

All-In-One Wall-mounted controller with built-in sensor 115/230VAC, 60 amp 2x30A capacity (240V). For Snow Melting.

Controls for Heated Driveways and Sidewalks

Intuitive outdoor controllers that will automatically activate based on readings from the temperature and moisture sensor. The DS series controllers are "all-in one" with mounted sensor and built-in relay contactors. DS controllers mount outdoors but come with the optional CDP-2 remote panel for indoor override.

The DS-2C and DS-5C controllers are for smaller projects up to 360 sqft. By combining the controller and sensor in one device, they are a simple addition to the Warmup heated driveways system.

ADVANTAGES

• Sensors & controller in one outdoor unit
• Full access to electronics for manual overrides
• Automatic activation - only on when needed
• Rain and snow detection
• Adjustable temperature trigger
• Selectable low temperature cut off
• Adjustable delay-off drying cycle
• LED indication on all controllers

By application

ASE-DS2 and ASE-DS5 are suitable for use with WSM and WSMM for in-ground applications.
ASE-DS8 suitable for use with NAMSR for Roof & Gutter applications.

Specifications;

• Operating voltage / Load - 100-277V
• Temp. range / Trigger temp. - -40°F/+185°F (-40°C/+85°C)
• Dimensions - 4.7"H x7"W x2.7"D
• Detects - Temperature and moisture

ACCESSORIES

CDP-2: indoor remote for DS controls. The remote control panel mounts in a typical electrical and connects to the controller via communication wire. A 12” communication wire connection is included. Extensions to be supplied by the contractor.

WARRANTY & MAINTENANCE

The DS Controller Series are warrantied for 1 Years against manufacturer’s defects and is protected by Warmup’s SAFETYnet guarantee. See www.warmup.com for full warranty details.

Warmup Snow Melting Specifications and installation

Warmup Snow Melting Questions & Answers