You May Also Like
Warmup DCM-PRO Heating Cable 200 sq ft 240VFrom: $899.00
Warmup DCM-PRO Heating Cable 200 sq ft
Available Voltage: 240 Volt Only
The Warmup DCM-PRO Cable is a custom designed cable compatible with all uncoupling membranes. It can be installed at 2, 3 or 4 pegs. The cable itself allows primary heating thanks to the twin-core ETFE cable, for highest output. It is guaranteed 30-years. Even better results when used with Warmup 4iE® Smart Thermostat.
|Cable length (ft)||
|Amps||Watts||2 pegs||3 pegs||4 pegs|
The DCM-PRO Heating Cable is durable and flexible. It’s ETFE inner jacket allows for high heat output while it’s PVC outer sleeve protects for a smooth installation. The DCM-PRO Heating cable is suitable for use with both Membrane options.
The DCM-PRO Membrane’s castellations make fitting the Heating Cable easy, quick, and tool free! The DCM-PRO Membrane protects the secured cable from any potential damage during installation – leading to a reduced risk of cable failures.
- Operating voltage - 120V, 208V or 240V
- Thickness - 3/16” (4.5mm - +/- 0.2mm)
- Output - Approx. 4W/lin foot
- Construction - Multi-stranded, dual wire
- Inner insulation - ETFE
- Outer jacket - PVC
- Earth braid - 85% min copper
- Cold lead - 10ft (3m) long, 2 core braided
The Warmup DCM-PRO Cable is compatible with Schluter® DITRA-HEAT, Prodeso Heat Mat, Flextherm FLEXSnap, Heatmatrix and Warmup DCM-PRO Membrane
WARRANTY & MAINTENANCE When installed according to the installation manual, the DCM-PRO Cable is covered with Warmup’s 30-year manufacturer warranty.
Warmup Specifications and installation
Warmup DCM-PRO Heating Cable Spec
Toll free 877 880 8453 or Email firstname.lastname@example.org