You May Also Like
TI-ProBoard Edging 8 FT$58.80
TI-ProBoard Edging 8 FT
8 Foot Edging for TI-Proboard Deck Tile System.
For small orders shipped UPS the 8 ft (96 inch) will be cut down to 95" inch
Should be set directly on an exposed edge as a finishing piece, holes allow thinset to push up through holes.
TI Board is the base of a unique system to form a solid tiled surface to new or existing floors.
TI- Proboard, underlayment boards for outdoor tiling installs directly to deck joists to provide a stable 3/8 in. substrate for installation of tile rather than traditional decking boards. Easy for home owner or professional installer, TI-Proboard prepares the deck surface for setting materials and tile installation. Tile the entire deck surface, a walkway, or insert a pad for grills and fire pits to help prevent stain or harm to the deck’s surface. Enjoy stylish outdoor solid surfaces that are durable and easy to maintain.
INTERIOR USE - TI Board can applied straight to the floor joist then tile (total thickness is less than 1 inch when using a standard tile. Making the transition from room with carpet to tile almost seamless (carpet will be on a plywood) compared to the standard tile installation of (plywood, subfloor, tile) which would be higher that a carpeted room and would require a “step up” to the tile area
TI Board is an anti-fracture material to protect the tile and is placed over plywood, (plywood will have failures)
TI Board is a structural material so there is no other plywood, backer boards etc.
To install, layout TI Board across the joists, clip each section together, use one coated deck screw to screw down each panel on every joist. Each joist is 16” on center.
No special tools are required. When your deck is finished there is a dry area underneath for storage.
The smallest tile that can be used - 6" x 6"
The weight per sq ft. of all components - Dead weight around 8 lbs. sq ft".
In accordance with the Performance - Level Requirement Guide of the 2003-2004 Handbook for Ceramic Tile Installation, the installation is rated as “EXTRA HEAVY” suitable for use in dairies, breweries, etc.
Fully loaded TI-Proboard (i.e. mortar, thin-set, Porcelain tile, and grout.) is 8lbs of dead weight per square foot
TI Board warranty - 10 years
We are in process of getting a Fire Test rating on TI Proboard