SunTouch ProMelt Snow Melting Cables 277 Volt 50 W Volt 75 - 98

SunTouch ProMelt Snow Melting Cables 75 - 98

Multiply spool can be combined to cover larger areas

Non stocking - Special Order

Specifications:

Coverage: 75 to 95 sq. ft

Amp Draw - 13.5

Spool Length - 297 feet

Ohms: 14 - 18

Snow melting cable on a spool. Perfect for complex or divided shapes and large areas.

SunTouch ProMelt products are a simple way to eliminate snow and ice from stair way, drive way, entry way and more.

ProMelt Cable is a complete heating cable consisting of a series resistance heating cable and a single power lead for easy single-point connection. The heating cable length cannot be cut to fit.

Fast and easy snow removal.
ProMelt is designed for small to medium sized projects for your residence or commercial building.
Contractors love it because it’s simple and goes in quickly.
Home Owners love snow-free surfaces and the lower installed cost.

Prevent accidents

• Reduce slips & falls on steps & walkways.
• Reduce "tracked-in" ice, snow & water.
• Reduce auto accidents.

Prevent damage

• Avoid salt damage to cars, floors & plants.
• Protect textured surfaces from snowplows.
• Protect landscaping from snowplows.

A tough product for a tough job.
ProMelt heating cables are built to last. They're made with low-oxygen copper elements covered with high-temperature ETFE insulation, a braided copper ground shield, and a super-tough polyurethane outer jacket for jobsite extremes.

ProMelt is well-suited in commercial and residential applications where first cost is important and mechanical rooms are small.

Follow these recommendations when selecting ProMelt Cables:

1. Determine what voltage will be used: 120VAC, 208VAC, 240VAC, or 277VAC.

2. Determine the heat output. The climate and amount of snowfall will dictate this choice. In general, most systems will require 50 Watts/Sq. Ft. spacing to melt snow and ice. Some residential or light commercial systems in temperate climates may need only 38 Watts/Sq. Ft. spacing.

3. Determine the square footage of the area to be melted. Do not include areas under built-ins like planters or similar obstructions. Stay 3-6" from edges of slabs and do not cross expansion joints if possible. Add up all the areas to be melted and round down the nearest mat size(s) to fill the area. Either 2'-wide or 3'-wide mats can be selected.

Not sure what you need? Contact us at 323-731-8453 or send your project layout and we will help design a complete system.

Helpful Resources:

• SunTouch How-To Videos
• SunTouch ProMelt Specifications Guide
• SunTouch ProMelt Installation Manual
• EMF - Electromagnetic Fields Information

Shop Related Collections:

• Shop All SunTouch Snow Melting Systems
• Shop SunTouch ProMelt Snow Melting Mats
• Shop SunTouch ProMelt Snow Melting Cables
• Shop SunTouch Snow Melt Controls & Accessories

Enjoy your new SunTouch ProMelt Snow Melting System!