Raimondi Diamond Gloss Finish Wheel for Bulldog - Step 5

Raimondi Diamond Gloss finish Wheel for Bulldog Machine - Step 5

All wheels are tested and balanced to give the best profiling results with our Raimondi Bulldog machines.

The Grey wheel is the third wheel to be used in the 3-step polishing line

BDW38S5NT Step 5 Gloss finish

• Gloss finish (second step to polish) - 3/8" (10mm)
• Diameter - 5" (125 mm)
• Arbor size - 25/32" (20 mm)
• Grit - Gloss 1500 Grit

BDW58S5NT Step 5 Gloss finish

• Gloss finish (second step to polish) - 5/8" (15mm)
• Diameter - 5" (125 mm)
• Arbor size - 25/32" (20 mm)
• Grit - Gloss 1500 Grit

STEPS

Step 1: uses the Segmented milling wheel to rough out the shape.
Step 2: Rough finish wheel of approximately
Step 3: Use yellow wheel for honed finish.
Step 4: Use red wheel for satin finish.
Step 5: Use grey wheel for glossy finish.

Fits on both Bulldog machines (BD1WD and BD2WD) and back-finishers (BDSABF and BDCBF)

45°ANGLE - A 45° angle can be achieved with the milling wheel and rough finish wheel. The two 45° wheels available can be used on all Bulldog machines, this includes the back-finishers.

BULLNOSE - Bullnose can be attained with the milling wheel, and rough finish wheel. These wheels come both in sizes 3/8" and 5/8"

MATERIALS - Built in hard material resin.

Click here for Raimondi Buldog ADV Accessories