COVID-19 Update. Satisfaction guaranteed. Call us anytime: 1-877-880-TILE (8453).
Cart: 0 items, $0.00

Your shopping cart is empty.

Checkout

Mosaic Glass Tile The Reef Series 2 x 2 - Light Blue

$22.00

Description

Mosaic Glass Tile The Reef Series 2 x 2 - Light Blue

Swimming Pool and Wet area Tiles

Price per Sheet (1.05 sq ft)

Material: Glass mosaic made of 98% recycled glass tile from Spain
Sheet Size: 12 1/4" x 12 1/2"
Sq Ft Per Piece: 1.57
Piece Size: 2" x 2"
Thickness: 1/8"
Colors: Light Blue
Finish: Glossy
Backing: Polyurethane Cord

  • Brighten up your pool or shower with this series of 100% recycled glass mosaics.
  • Pool rated and acceptable for use on shower walls.
  • The polyurethane cord backing makes installation easy.
  • Use for Interior Dry Walls, Interior Floors, Shower Walls, Shower Floors, Pools, Pool Liners, Exterior Walls

Installation Guide

Always refer to the TCNA and or the ANSI publications for specific installation standards, always use an accredited licensed contractor experienced in the art of installing mosaic products.

Installation Instructions

Recommended Substrates:

  • Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
  • Cementitious backer units (CBU)-ANSI A118.9.
  • Concrete slabs cured for 28 days minimum.
  • Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
  • Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
  • Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8”away from any naked flame.

Setting Materials & Methods:

Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.

  • Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
  • Only use setting materials that meet or exceed TCNA guidelines
  • Only use an accredited licensed contractor experienced in the art of installing mosaic products.
  • Setting methods must conform to the TCNA guidelines.
  • Always cut the Victoria Metals with finished side down. During the cutting process, feed the aluminum product through the blade at an extremely slow speed to avoid grabbing.
  • Do not cover/protect the Victoria Metals with adhesive tape of any kind.
  • When installing our Botany Bay Pebbles, in order to get a seamless interlock from sheet to sheet you may need to rotate the sheets to find the optimal interlocking side with the least amount of gap. You may also need to remove and reposition pieces to fill in the gaps.

Note: Grout Selection:

The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.

Sealing Guide:

  • Sealing prior to grouting is recommended for all stone mosaics.
  • Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
  • Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
  • Note: Only use water based sealers with Sydney Harbor Metals.
  • Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.

Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish

 

Chat with us Chat