Modern Stones Easy EtchFrom: $8.50
Modern Stones Easy Etch
Acid Based Cleaner
Available: Gallon, Quart, 5 gal - Concentrated
Professional Results . . . GUARANTEED!
Modern Stone's Easy Etch removes grout and mortar smears, mineral deposits and rust stains. This industrial strength concentrated acid based cleaner is specially formulated to etch grout to bond with Modern Stone's Color Sealer. Use on acid-resistant tile, stone or masonry surfaces.
Grout, Acid-resistant Tile, Stone, Masonry surfaces
This product is not for use on natural stone surfaces such as flagstone, marble, travertine, limestone or any other acid sensitive surface. A pre-test for resistance should be performed prior to use
1. Sweep or vacuum surface to remove loose debris.
* Note: Mask off acid sensitive areas such as stainless steel and natural stone.
2. Dilute Easy Etch with water depending on cleaning task.
* Light cleaning: Mix 1 part with 10 parts water.
* Medium cleaning: Mix 1 part with 6 parts water.
* Heavy cleaning/etching: Mix 1 part with 3 parts water.
3. Apply solution to area and allow to dwell 1-2 minutes. DO NOT allow to dry on surface.
4. Agitate with soft-bristle brush or acid resistant scrubber.
5. Remove dirty solution using a wet/dry vacuum, sponge, or damp mop.
6. Rinse thoroughly with clean water to remove residual cleaner.
7. Dry surface with terry cloth towel.
Covers Approximately 1000 to 10,000 sq. ft per gallon.
Handling and Storage
Close container after each use. Store in original container only. Keep in a dry, well-ventilated area. Avoid freezing or long-term high temperature storage
Rubber gloves and eye protection should be worn during application. Avoid contact with eyes and skin. Immediately flush eyes with water. If skin contact occurs wash with soap and water. Do not take internally. Do not induce vomiting. Seek medical attention.