Miracle Mira Shine - Gallon$28.00
Mira Shine High Gloss Sealer - 1 Gallon
This sale is for limited time and limited quantity (in stock: ships same day).
Medium to High Gloss Interior Surface Sealer For:
• Saltillo Tile • Brick • Terra Cotta Tile • Slate • Unglazed Ceramic Tile • Concrete & Grout
Mira Shine is formulated for interior use as a high gloss surface sealer. The combination of Mira Shine with the appropriate Miracle Sealants penetrating sealer provides durable protection.
All surfaces treated are harder and less slippery. Independent laboratory tests show 511 Impregnator out performs competitive products. (Test results are available upon request.)
- Interior Use
- VOC Compliant
- Floors only
- Scuff Resistant
- Water Based Formula
400 - 2,000 sq ft per gal (37 - 180 square meters per 3.785 liters).
Coverage will vary depending on the density, porosity, textures, surface absorption, weather, time solution left on surface and application methods.
Used as directed, Mira Shine coverage will vary from 400 - 2,000 square feet per gallon.
How to Use:
Mira Shine can be applied with a Mira Brush, Hand/Stand Applicator, pump sprayer, natural fiber brush or clean mop. Installation should be clean and completely dry before using. When using a sprayer, apply as evenly as possible. Follow the sprayer with a brush or applicator to even out Mira Shine before it dries on the surface. Do not apply Mira Shine to a hot surface (800 F+). Best range (500 F - 800 F)
Multiple applications may be necessary to achieve desired results. Proceed with subsequent applications after each has dried (Approximately 1 - 2 hours). Be sure to even out the Mira Shine on the surface, blending in overlap marks and eliminating all bubbles. Do not allow Mira Shine to puddle on the surface.
To strip or remove Mira Shine use H2O Strip as directed. Allow new installations to cure per the manufacturer’s specification before using Mira Shine. Mira Shine is a topical coating, that will inhibit vapor transmission and will scratch, scuff and mark under normal conditions.
Mira Shine will be dry to the touch in 1 - 5 hours and may be used for normal foot traffic. For optimum results the area should be kept dry and free from staining materials for 72 hours.