You May Also Like
ATR Tile Leveling System GRID Spacers Pro 1200$519.95
ATR Tile Leveling Alignment System Pro 1200
Tiling made easy with the ATR Tile Leveling System
ATR Tile Levelling Solution for laying wall and floor tiles with ease
Floors and Walls
In stock - Ship Same Day
Kit Include: 800 Cross Spacers 200 Edge Spacers 200 (Re-Usable) Pre-Assemble Spindle, Tool Bag and 10mm socket (1 per customer) (compare at $906.75 other leveling system)
About 950 sq ft coverage area
Grout spacer 3/32" (2mm) - Tile thickness (1/4 - 3/4) (6mm-20mm) 15/64 - 51/64
You only need 1 cross spacing plate for 4 tiles NOT 4 Clips like every other Leveling System
While every other system require 376 units for 100 pieces of tile ATR require only 117
Very easy to learn and use at any skill level
Advantages of the ATR Tile Leveling System
- No Tools (GUN) needed! No need for expensive hand tools.
- Simple and quick to lay with only 2 elements: Spacer & Spindle.
- The only system that removed without the use of a force
- Only System that leave clean grout line (no risk of spacers not break all the way)
- Cross Spacers (+) Shape allow for 2/3 of saving
- Creates a lippage free surface
- Keeps tiles in place while drying
- All-in-one grout spacing and tile alignment system
- Stress free installation
- Professional finishes every time
- Very simple and easy to use
- Saves time
- Suitable for floors and walls
- Suitable for indoor and outdoor uses
- Re-usable spindle
- Australian design and Australian made
Example of the difference between the ATR Tile Leveling System and other leveling systems
100 pieces of tile project ATR use total of 117 spacers with approximately cost of $29.99 compare to any other leveling system 376 spacers with cost of $44.00
About 33% saving in money of spacers and over 66% time saving in Labor of saving on installing additional 259 pieces
How to use 3 Easy steps
1. Spread thinset install tile
2. Screw spindle into spacing plate, Slide spindle with spacing plate attached in between two tiles.
3. Tighten spindle clock wise firmly until all four corners are aligned flush.
* Remove Re-usable spindle once tile adhesive is dry.