InvisaTread Application Instructions
Step 1 – Clean / Rinse | Step 2 – Apply InvisaTread® | Step 3 – Dwell Time (See Dwell Time Chart) | Step 4 – Rinse and Remove |
Clean and degrease area with cleaner / degreaser. Cleaning product should not leave any residue on surface.
Traction Wash™ or product with like characteristics recommended. |
Spray, pour or mop InvisaTread® or InvisaTread® Outdoors onto surface. Spray recommended for best coverage.
Metal drains or carpet areas should be masked off. |
Allow InvisaTread® to dwell on surface for a period of time.
Area should not dry out during process. Add more product as needed. See dwell time chart for more details |
Rinse thoroughly with clean water and remove rinse water and residue material.
For stone or concrete surfaces; residue might need to be scrubbed off. Area may be used immediately. |
Dwell Time Chart
Always test a small hidden area or extra tile first. Dwell times are approximate as all surfaces are not the same. INVISATREAD® AND INVISATREAD® OUTDOORS ARE NOT RECOMMENDED FOR POLISHED MARBLE.
Surface Type | Dwell Time | 2nd Application |
---|---|---|
Porcelain / Ceramic – Glazed | 10 – 12 min | Varies depending on glazing and surface – Shiny surfaces should be treated for 5min 1st to check for shine and slip resistance. |
Porcelain – Matte | 10 – 12 min | Varies depending on surface |
Porcelain – Polished | 6 – 8 Min | No |
Quarry Tile | 10 – 12 min | Varies depending on surface – degrease thoroughly |
Honed Stone (Travertine, Limestone, Marble etc) | 7 – 10 min | Varies depending on surface – May be sealed after with an impregnating or penetrating sealer. Residue will need to be scrubbed off. |
Granite | 3 – 6 min (maximum) | No – test area before in order to preserve shine. |
Concrete /. Polished Concrete | 8 – 12 min | No – Residue may need to be scrubbed off. Rinse thoroughly |
Terrazzo | 8 – 10 min | No – Residue may need to be scrubbed off. Rinse thoroughly |
After Treatment Maintenance
InvisaTread is a micro etching product which increases the Coefficient of Friction (COF) by making microscopic changes to the treated surface. Most surfaces treated with InvisaTread® or InvisaTread® Outdoors will look and feel the same as before treatment. In order to maintain this increased COF, treated surfaces must be properly maintained and cleaned. Cleaners / degreasing products can be used providing that they do not leave any residue on the surface which will fill in the microscopic changes to the treated surface.
Use Traction Wash™ at a 1:32 dilution for regular cleaning and maintenance or 1:10 for heavy grime.
For more questions and additional surfaces please contact customer support at 888-877 (TILE) 8453 or support@flooringsupplyshop.com
Copyright © 2010 FlooringSupplyShop.com
Sealers Links
Glaze N Seal Wet Look 2000 – Glaze N Seal Wet Look II – Miracle 511 Impregnator Sealer
– Glaze N Seal Multi Purpose Sealer – Stone Defender Aerosol Grout Sealer – Glaze n Seal Stone Color Enhancer and Seal
Cleaning and Care links
Glaze ’N Seal Heavy Duty Cleaner – Glaze N Seal Paint and Sealer Stripper – Miracle Porcelain Ceramic Cleaner
Anti Slip Links
InvisaTread Application Instructions – InvisaTread Product Description – Glaze ’N Seal Grip N Seal – Tile Grip Anti Slip