FAQ THE MORE YOU KNOW…
Q: Is InvisaTread® safe?
A: ABSOLUTELY. InvisaTread is safe enough to use in a child’s bathtub.
Q: How long does InvisaTread® last?
A: Surfaces should remain slip resistant for 2 yrs. at home and 1yr. in high traffic areas. Areas need to be maintained clean to keep optimum slip resistance.
Q: How easy is InvisaTread® to apply?
A: It’s as easy as 1-2-3:
All surfaces are different. It is always prudent to test a small hidden area or extra tile first.
1. Clean area first with Traction Wash
2. Apply with sprayer, mop or sponge and let stand for 5 – 15min. Shorter time for stone and concrete, longer time for glazed tile surfaces. Visit www.flooringsupplyshop.com for more details.
3. Clean and rinse area thoroughly with clean water.
Q: Is there a specific way to clean surfaces treated with InvisaTread®?
A: NO. Surfaces need to be cleaned with products that do not leave a residue. We recommend Traction Wash
Q: Does InvisaTread® work on marble?
A: Yes! Though, it’s important to note that all marble surfaces are different from one another – call 877-880-8453 for specific marble application instructions if needed.
B: InvisaTread® is safe for some marble surfaces but not POLISHED MARBLE.
Q: If my floor is sealed, can I still use InvisaTread®?
A: Yes, InvisaTread® will work through most floor seals and effectively apply the “invisible tread” you need. (May take 2 applications.)
Q: What if there is grease on my floor?
A: For maximum slip protection, areas need to be thoroughly degreased prior to application. Use Traction Wash at a 1:1 mix and let stand for 15 – 20 min to loosen all grease. Grease prone areas need to be maintained clean for maximum traction.
Q: Can I wax over InvisaTread®?
A: NO. By waxing over the InvisaTread®Anti-Slip application, you will probably fill in the “invisible tread” that InvisaTread® Anti-Slip has
placed on your floor. A dry buff is recommended to bring out the shine.
Q: Is InvisaTread® Outdoors safe?
A: Absolutely. InvisaTread® Outdoors is a DIY product. Simply spray or mop on, let stand and rinse away thoroughly.
Q: Can I apply InvisaTread® Outdoors in direct sunlight?
A: The area that is being treated needs to stay wet with InvisaTread® Outdoors during the entire dwell time. Add more product to any areas that start to dry out during application.
Q: What if it is windy during application?
A: If areas start to dry out during the dwell time, simply add more InvisaTread® Outdoors.
Q: Do areas treated with InvisaTread® Outdoors require any special cleaning or cleaning products?
A: Surfaces need to be maintained clean for optimum increased traction. We recommend Traction Wash. Traction Wash has been formulated to not leave any soapy residue.
Q: Can InvisaTread® Outdoors be applied inside of the pool?
A: YES!! Surfaces can be treated before the pool is filled with water. Consider treating beach entries or even pool stairs.