DTA Leveling System PRO I Kit

$179.95
Qty:
Item is in stock

Description

DTA Lippage Leveling System Pro I

Pro Starter Kit

This kit for the Pro Installer that will build up their kit as the go.

Kit Include

• 200 Re-usable Caps • 500 Spacers Non Re-usable • Floor/Wall Tool Gun

2 Part System with Caps and Spacer that eliminate lippage in tile installation

Very easy to learn and use at any skill level

Spacers Features:

  • Serrated on both sides
  • Longer spacers (pavers)
  • Curved base for tensioning.
  • No soaking require

2 Part System with Caps and Spacer that eliminate lippage in tile installation

Very easy to learn and use at any skill level

FEATURES:

  • 2 Part System with Caps and Spacer that eliminate lippage in tile installation
  • Gun Tensions cap and spacer together
  • Gun can be used for walls and floors
  • Reusable Caps
  • 40mm Adjustment
  • Ideal for Wall and Floor

How to use Lippage System

1. Place Lippage Spacer between tiles 4" from both ends of tile.
2. Once tile and spacer are in place, fasten the Lippage Cap. There is a cap release lever to allow the cap to be removed if necessary.
3. Clamp the two pieces together leveling the tiles, Using the Leveling Gun, This will hold the tiles in place while the tile adhesive sets.
4. Once tile adhesive has dried, simply kick the Cap along the grout joint to remove. Use white rubber mallet to remove from walls. Grout to finish tiled area.
5. Remove Cap from Spacer for re-use

Click Here to watch the Video

Details

  • Model: DTA-KIT-200

Reviews

Overall Rating:
2 out of 5 stars (based on 1 review)

  • By Graham Knight on Nov 9, 2015
    I started using the DTA leveling kit this weekend. When it works, it works very well, but i have a very high failure rate on the caps. They do not grip the straps correctly which allows them to slip instead of holding constant pressure. It appears to be a problem with the cap, because when one slips it will slip on any strap.

Tags