PreFormed Ready to Tile Soap Niche

Price:

$49.99  $34.99
Save: 30%

Qty:

Description

PreFormed Ready to Tile Soap Dish

Best Ready to tile Curb Overlap and Solid in the market made of 2 Lbs. High density compress polystyrene with Waterproofing coating

Approx pre-finished dimension

Rough Sizes: 10" x 10" x 4" Deep

Net Sizes: 8" x 8" x 3 1/2" Deep

Cavity Depth is 3.5" All Dimensions are nominal

PreFormed® Niches are molded from high-density polystyrene with a liquid-applied waterproof coating. PreFormed® Niches' unique in-wall design allows them to be tiled with the same tile as the walls. Niches can also be used as a decorative nook in kitchens, foyers or any other area of a home imagined.

PreFormed™ Niches... Anywhere you want to store, display... bath, kitchen, hall or exterior wall. PreFormed™ Niches are amazingly versatile. Easy to install and ready to tile in minutes, not hours.

PreFormed Niches feature in-wall construction. This unique design allows you to tile with the same tile as the surrounding walls.

PreFormed™ Niches are a one-piece construction, and waterproof. Guaranteed to never rot, degrade, or leak. Their insulative factor does not promote condensation in the wall cavity.

Materials: Saw or utility knife for cutting substrate layer out of niche location. Polyurethane sealant and fiberglass mesh.

Easy, Waterproof, Worry Free. The difference is CLEAR.

The "Anywhere" Solution

Preformed Ready to Tile Niches Information

 

Specifications

Installation to Existing 2 x 4 Wall

1. Determine desired height of niche and draw level line on substrate layer.
2. Place niche with the bottom flange of the box centered on the level line.
3. Trace exterior flanges.
4. Cut along line and remove substrate layer. If accessible, install 2 x 4 horizontal cross bracing to support niche.
5. Use polyurethane sealant to adhere niche to studs.
6. Seal joints between niche and backer board using polyurethane sealant or fiberglass mesh and liquid waterproof membrane
7. Install tile according to Tile Council of North America (TCNA) guidelines.

Installation in new Construction

1. Determine desired height of niche and mark 2 x 4 accordingly.
2. Install horizontal cross bracing to support niche.
3. Use polyurethane sealant to adhere niche to studs.
4. Next, install 1/2" backer board on all walls and flush to niche 1/2" flanges.
5. Seal joints between niche and backer board using polyurethane sealant or fiberglass mesh and liquid waterproof membrane.
6. Install tile according to TCNA guidelines.

Advantages

Lightweight and durable.
Factory installed, code approved waterproofing meets ANSI A118.10 requirements
Multiple design options
20 - Year Limited Warranty

Uses

Showers and tub surrounds
Residential and commercial Suitable Substrates
Kitchens, entry ways or anywhere an in wall nook is desired.

Limitations

Must be covered with ceramic tile, stone or latex paint finish.
Mastics and silicones are never to be used.
Don’t expose to rubber solvents or ketones.
Don’t expose to sun or weather.

TECHNICAL DATA

Curb Overlays are rated to 40 psi.

Click here for more information

 

  • Model: IFCR308

Reviews

Overall Rating:

  • July 20, 2012
    By: Carol McWilliams
    Excellent. No issues. Quick ship. Tilers said it was an easy piece to use.

Tags