Raimondi Diamond Honed finish Wheel for Bulldog - Step 3

Raimondi Diamond Honed finish Wheel for Bulldog - Step 3

Starting at: $200.00
Model

Qty:
Item is in stock

Description

Raimondi Diamond Honed finish Wheel for Bulldog Machine - Step 3

All wheels are tested and balanced to give the best profiling results with our Raimondi Bulldog machines.

The Yellow wheel is the first wheel to be used in the 3-step polishing line

BDW38S3NT Step 3 Honed finish

  • Honed finish (first step to polish) - 3/8" (10mm)
  • Diameter - 5" (125 mm)
  • Arbor size - 25/32" (20 mm)
  • Grit - Honed (400 grit)

BDW58S3NT Step 3 Honed finish

  • Honed finish (first step to polish) - 5/8" (15mm)
  • Diameter - 5" (125 mm)
  • Arbor size - 25/32" (20 mm)
  • Grit - Honed (400 grit)

STEPS

Step 1: uses the Segmented milling wheel to rough out the shape.
Step 2: Rough finish wheel of approximately
Step 3: Use yellow wheel for honed finish.
Step 4: Use red wheel for satin finish.
Step 5: Use grey wheel for glossy finish.

Fits on both Bulldog machines (BD1WD and BD2WD) and back-finishers (BDSABF and BDCBF)

45°ANGLE - A 45° angle can be achieved with the milling wheel and rough finish wheel. The two 45° wheels available can be used on all Bulldog machines, this includes the back-finishers.

BULLNOSE - Bullnose can be attained with the milling wheel, and rough finish wheel. These wheels come both in sizes 3/8" and 5/8"

MATERIALS - Built in hard material resin.

Click here for Raimondi Buldog ADV Accessories

Details

  • Model: BDW38S3NT

Reviews

Be the first to write a review. Write a review.