Warmup Extra Temperature Probe Sensor - DCM-SP-10K$21.00
Warmup Extra Temperature Probe Sensor
10 ft. Long Dual Voltage 120/240
Additional Floor Sensor for the 4iE Smart WiFi Thermostat
If you are adding Extra Temp Sensors, run both sensors from the control box to the floor below and then weave them into the mat 6 to 12 inches from the wall. You can put them side by side, but connect only one to the thermostatic control. If you ever need to replace a faulty sensor, you’ll have one at your fingertips
Floor Sensor directly senses floor temperature
- Length: 3 meters or 10 feet
- Cable thickness: 3mm or 1/8"
- Probe dimensions: L x W = 20mm x 6mm or 5/8” x 1/4"
- Cable gauge: 24Ga 2-signal low voltage wire (extendable to 90)