Victoria Metals Series Interlock - Falls Creek Blend$49.95
Victoria Metals Series Interlock - Falls Creek Blend
Victorian Metals aluminum is 98% post-consumer recycled aluminum
Material: Aluminum and Glass
Sheet Size: 12" x 12"
Piece Size: Mixed: 5/8" x 2", 5/8"x 4", 5/8" x 6"
Color: Falls Creek Blend
Finish: Etched, Polished and Matte
Victorian Metals may be installed on interior residential or commercial wall areas, in wet or dry locations, such as a shower wall, kitchen, or vanity backsplash. It may be installed vertically in exterior frost-free areas. It is not recommended for counter tops or floors. It can be used for steam showers however it is not recommended for submerged areas.
This aluminum and glass blend has a combination of shiny etched, polished, and matte textures. The aluminum pieces are hollow on the back for a super light weight feel. When installing, there is no need to fill the entire back cavity as the extrusion lugs on the pieces provide an excellent mechanical bond.
The metals are 100% aluminum. The aluminum copper and bronze colors are produced by a staining process. Each piece of metal has an ‘etched’ surface finish and depending on the color, the etching is more prominent on certain colors than others. For example, the etching is more noticeable on the lighter colored metals than the darker. Within the aluminum mosaic blend, there are random inserts of 1x1 glass mosaics. The glass mosaic edges are capped with bronze polished framed pieces to add a unique and contemporary look to the Victoria Metals. The bronze pieces are produced by an anodizing process. During installation, excess grout between the metal caps and glass pieces can be removed with either a soft toothbrush or toothpick.
The Victoria Metals are 8mm thick. Each piece has a recessed backing and therefore is considerably lighter in weight as oppose to most other metal mosaics that we offers.
These metal colors will be installed randomly on the sheet from the factory which adds to the character of the product.
- Always cut with the finished side down.
- When cutting, feed the product very slowly to avoid grabbing.
- Do not cover or protect the surface with adhesive tape of any kind.
Care & Maintenance
Regular cleaning with a neutral tile cleaner and a soft cloth or sponge is recommended. Use cleaning products that don’t leave a residue behind. Rinse with a soft wet cloth. Buff dry with a soft cloth. Do not use acids or cleaners containing acids, oils, corrosive chemicals, or abrasive cleaners.