Smiths Paint Concrete Color Stains 5 Gallon$749.00
Smith's Paint Concrete stain 5 Gallon
Approximately coverage per Diluted Gallon 250 - 400 sq ft
Smith's Color Floor is a water-based extra-strength stain developed to give a decorative natural appearance to concrete floors and other porous mediums.
Available 4 oz, Quart, Gallon and 5 Gallon
Generic Type: Waterborne acrylic
Three different “Series” give the applicator a wide range of affects that they may obtain. All the colors in the Color Floor line are totally compatible with one another in both the dry and wet stage.
Classic Series: can be used for applications that range from high hide to transparent variegated appearance.
Old World Series: remain transparent even with multiple coats appear very similar to acid stains.
Bright Light Series: are high-Chroma, intense colors for accenting or artistic differentiation
Smith's Color Floor is a water-based extra-strength stain developed to give a decorative natural appearance to concrete floors and other porous mediums. It is an excellent tool for the concrete market that can produce unbelievable works of art. Formulated as a user-friendly alternative to hazardous solvent and acid-based stains, Color Floor utilizes state-of-the-art acrylic polymer research and pigment preparation to ensure the highest quality results. Thanks to its superior adhesion, the stain works well on a variety of surfaces including, but not limited to, interior and exterior concrete, brick, plaster and natural stone. Color Floor can be applied to previously sealed surfaces, allowing an applicator to save jobs with little hassle. In addition to the Classic Series (semi-transparent stains), Smith’s Color Floor is available in Old World Series (transparent stains) and Bright Light Series (high-Chroma stains).
Color Floor can be applied via airbrush, high volume low pressure unit (HVLP), production gun, pump (bug) sprayer, sea sponge and traditional bristle brush. For best results, create a “mist” of Smith’s Color Floor on the intended surface. A variegated finish is achieved through the various absorbencies of the surface material as well as the differing specific gravities of the color pigments. Roller application methods force absorption of the diluted stain resulting in mechanical lines.
General Properties: A decorative stain for concrete surfaces. Smith’s Color Floor is water submersible, alkali, weather and UV light resistant. These stains require a top coat and are compatible with solvent based, water-based, single and two component products, including but not limited to urethanes, acrylics and epoxy clear sealers. Warning: Smith’s Color Floor is not compatible with Methyl Methacrylate or penetrating (e.g. sodium silicate) sealers.
- Low Odor
- Low VOC
- Weather Resistant
- Ultra Violet Light Resistant
- Alkali Resistant
- Water Submersible
- Fast Air Dry
- Overnight Deliverable - No Red Label
- Interior/Exterior Application
- May be applied over previously sealed surface
- Compatible with neutralized acid-based stains
- Compatible with overlays, as a topical stain and as integral color
May contribute to LEED credits
- EQ Credit 4.2 Low-Emitting Materials: Paints & Coatings
- MR Credit 5.1 Regional Materials: 10% Extracted, Processed & Manufactured Regionally
- MR Credit 5.2 Regional Materials: 20% Extracted, Processed & Manufactured Regionally
Coverage per Diluted Gallon: 250-400 square feet (4oz = 35 sq ft)
Note: Coverage depends on surface porosity, pro=le and desired appearance.
Recommended Use: A user-friendly stain for concrete floors and other porous substrates. May be applied over sealed surfaces (refer to Application Instructions).
Not recommended for: Non-porous substrates (e.g. metal, resin, fiberglass) when submerged in water or exposed to severe cold weather conditions.