You May Also Like
Smith's Seal Water Base Gloss$94.50
Smith's Seal Water Base Gloss - 1 GL
Smith's Seal WB is a single component urethane/acrylic-polymer based, high solids sealer for the decorative concrete industry.
This product is clear, non-yellowing and easy to apply. Smith's Seal WB offer great improved chemical resistance when compared to standard acrylic based curing and sealing compounds. The product has been formulated to seal and protect Smith's Color Floor, Color Wall and Color Accents by producing a hard, yet flexible, clear film.
Smith's Seal WB is a low level VOC formulation which meet both the South Coast AQMD and EPA standards. This single component sealer was specifically developed for the residential decorative concrete market.
Smith’s Royal Seal High Gloss is a low VOC, non-yellowing, acrylic-based, liquid sealer for decorative concrete, brick, interlocking pavers, natural and manufactured stone.
Transparent and easy-to-apply, this product enhances the beautiful rich tones with a high gloss appearance. Smith’s Royal Seal has been formulated to seal and protect decorative colored concrete by producing a hard, yet flexible, clear film.
- Low Odor
- High Gloss or Low Sheen
- Ultra Violet Light Resistant
- Alkali Resistant
- Fast cure time
- Infinite inter-coat adhesion
- Low VOC 10-11gl
- Interior and Exterior application
- Overnight Deliverable - No Red Label
Smith’s Royal Seal dries quickly. Drying times may be extended depending on application rate, temperature, humidity and project conditions. Restrict foot traffic for at least six hours. Twelve hours is preferred.
Cure Times: (optimal) Temperature - 77°F Relative Humidity - Dry Time 2-3 hours - Recoat 4 – 24 hours - Foot Traffic 6-12 Hours - Wheel Traffic 24 Hours
Coverage per Gallon Porous: 300 - 600 sq. ft.
Note: Coverage depends on surface porosity and profile. Atomization will increase coverage.
Recommended Use: Applied as a film forming protective coat to increase the durability and longevity of Smith’s Color Floor, Color Wall and Color Accents.
Not Recommended For: Pre-sealed and/or nonporous surfaces including, but not limited to ceramic and porcelain tile.