ProCure Acrylic Additive Gallon$16.99
ProCure Acrylic Additive - 1 Gallon
Adds water resistance and improves setting over hard-to-bond surfaces
ProCure™ Acrylic Additive is a liquid polymer designed to be used in place of water to increase performance and bond strength of thinset mortars like ProBlend™ and ProSet™ or grouts like ProTillo.™ It adds water resistance and improves setting over hard-to-bond-to surfaces.
AREAS OF USE
For use with unmodified Portland cement mortars and grouts. Add to ProBlend or ProSet thinset mortars or to ProTillo grout. Use when setting impervious porcelain tile, glass or when higher bond strength is desired. Good for interior and exterior floors, walls, countertops or any areas subject to severe weather.
See limitations on the individual product you are adding ProCure to.
Meets ANSI A118.4 installation requirements.
Follow all directions on individual product you wish to add ProCure to.
See curing time on the individual product you are adding ProCure to.
Clean with soap and water before product dries.
Refer to individual product that you are adding ProCure to.
Close container after use. Keep any remaining product in original container. Store out of direct sunlight. Keep from freezing.
Wear rubber gloves and eye protection. Avoid eye contact or prolonged contact with skin. If eye contact occurs, flush with water for 15 minutes. Consult physician immediately.
KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY.
Western States Wholesale, as blender of processed material in the State of California, we are required by Proposition 65 to warn that one or more of the components in this product, contains chemicals known to the State of California, to cause cancer, birth defects, or other reproductive harm.