Warmup Roof and Gutter Outdoor Control - ODC-ASE-DS8C
$843.00Description
Warmup Roof and Gutter Outdoor Control - ODC-ASE-DS8C
Roof & Gutter controller with 30A resistive load capacity.
Intuitive outdoor controllers that will automatically activate based on readings from the temperature and moisture sensor. The DS series controllers are "all-in one" with mounted sensor and built-in relay contactors. DS controllers mount outdoors but come with the optional CDP-2 remote panel for indoor override.
The DS-2C and DS-5C controllers are for smaller projects up to 360 sqft. By combining the controller and sensor in one device, they are a simple addition to the Warmup heated driveways system.
ADVANTAGES
- Sensors & controller in one outdoor unit
- Full access to electronics for manual overrides
- Automatic activation - only on when needed
- Rain and snow detection
- Adjustable temperature trigger
- Selectable low temperature cut off
- Adjustable delay-off drying cycle
- LED indication on all controllers
By application
ASE-DS2 and ASE-DS5 are suitable for use with WSM and WSMM for in-ground applications.
ASE-DS8 suitable for use with NAMSR for Roof & Gutter applications.
Specifications;
- Operating voltage / Load - 100-277V
- Temp. range / Trigger temp. - -40°F/+185°F (-40°C/+85°C)
- Dimensions - 4.7"H x7"W x2.7"D
- Detects - Temperature and moisture
ACCESSORIES
CDP-2: indoor remote for DS controls. The remote control panel mounts in a typical electrical and connects to the controller via communication wire. A 12” communication wire connection is included. Extensions to be supplied by the contractor.
WARRANTY & MAINTENANCE
The DS Controller Series are warrantied for 1 Years against manufacturer’s defects and is protected by Warmup’s SAFETYnet guarantee. See www.warmup.com for full warranty details.