Warmup Extra Temperature Probe Sensor - DCM-SP-10K

Warmup Extra Temperature Probe Sensor

10 ft. Long Dual Voltage 120/240

Additional Floor Sensor for the 4iE Smart WiFi Thermostat

If you are adding Extra Temp Sensors, run both sensors from the control box to the floor below and then weave them into the mat 6 to 12 inches from the wall. You can put them side by side, but connect only one to the thermostatic control. If you ever need to replace a faulty sensor, you’ll have one at your fingertips

Floor Sensor directly senses floor temperature

Technical Specifications

• Length: 3 meters or 10 feet
• Cable thickness: 3mm or 1/8"
• Probe dimensions: L x W = 20mm x 6mm or 5/8” x 1/4"
• Cable gauge: 24Ga 2-signal low voltage wire (extendable to 90)

Warmup How to Video's

Warmup D4iE Smart Thermostat Installation & Operating Instructions