Satisfaction guaranteed. Call us anytime: 1-877-880-TILE (8453).
Cart: 0 items, $0.00

Your shopping cart is empty.

Checkout

PROtecSG High Gloss Protective Micro-Guard Data Sheet

October 20, 2013

Floor wax, floor polish Floor Sealer, protective floor coating, surface protection

High Gloss Protective Micro‐Guard
FOR POLISHED CONCRETE / TERRAZZO

DESCRIPTION:

PROtecSG™ is a stain resistant hybrid micro‐polymer sealer designed to enhance and create a surface that is:

PROtecTraction™ for Polished Concrete / Terrazzo is a low build formula that creates a coating that is:

  • Scratch resistant
  • Scuff resistant
  • Stain Resistant
  • Water resistant
  • High Gloss with high speed burnishing

PROtecSG™ offers versatility and ease of application:

  • Easy to Apply
  • Rapid Dry Times
  • Rapid Hardness
  • Excellent flow and leveling properties.
  • NO VOC
  • High Wet Coefficient of Friction (COF) ‐ Exceeds ASTM D‐2047 and ANSI 137.1 DCOF Acutest Methods

Application:

Surface shall be dry, stable, clean and free of all dirt grime and other foreign contaminants. Apply 2 tin (1500 sq. ft. per gallon), even coats using a pump sprayer and flat‐pad microfiber applicator by “spray and spread” technique. (Mop‐and‐bucket may be used as well but not recommended). Allow to dry 10‐20 minutes between coats.

  • PROtecSG does not require high speed buffing after application.
  • Allow a full 48 hours to cure prior to utilizing any alkaline cleaners.

Routine Maintenance:

Use TractionWash™ mixed at 4oz : gallon of water for routine cleaning. For optimum high DCOF always extract surfaces following cleaning. Burnish as needed for gloss enhancement or repair.

Patching:

Should a stain penetrate the treated surface a patch may be applied as follows: 1) using 800 grid diamonds polish the stained area until fully removed. 2) Use 1500 grit or finial gloss grit of polish. 3) Apply 2 thin coats of PROtecSG with at least 6 inches of overlap per coat to feather in. 4) Burnish to match surrounding area.

Recoat:

The top coat should require a thin recoat every 3 – 6 months depending on the type and amount of traffic. Coating can last as long as 12 ‐ 18 months in many applications. To apply a recoat, scrub the surface with a low speed buffer or automatic scrubber with a medium scrub pad (blue or green) and TractionWash mixed at 4oz : gallon of water. Rinse the surface with clean water and let dry before applying. Re‐apply PROtecSG per initial application instructions. Only 1 additional coat should be needed in most applications.

High Speed Burnishing:

To restore gloss, periodically high speed burnish PROtecSG with a high speed (1000+ RPM machine using a synthetic / hog hair blend (Thermal Gloss) pads. PROtecSG should never be buffed within 24 hours of initial application

SPECIFICATIONS:

COLOR: ……………………………………….. White, stable emulsion
ODOR: …………………………………………. Mild, sweet
pH:……………………………………………….. 8.0 + 0.2
HMIS RATING ……………………………… Health =1 Flammability = 0 Physical Hazard = 0
REFRACTOMETER SOLIDS: ………… 17.5%
FLASH POINT:……………………………….. None (C.O.C. Method)
VOC CONTENT: ……………………………. Less than 1% by weight or less than 10 grams/liter
COVERAGE: …………………………………. 1500 -2000 sq. ft. per gallon
DRYING TIME: ……………………………… 45 minutes at 20°C. (68°F.), 50% relative humidity.
RECOAT TIME: …………………………….. 60 minutes at 20°C. (68°F.), 50% relative humidity.
GLOSS: ………………………………………….. 90 (A.S.T.M. Test D-523, 60°)
SAFETY (slip resistance): ………………… Exceeds requirements (A.S.T.M. Test D-2047) & ANSI 137.1 DCOF Acutest
PACKAGE SIZES: …………………………… 4 x 1 gallon jugs

Contaminants were tested under the following conditions:

Temperature: …………………………………..68° F., 30% RH Film

Thickness: ………………………………..approximately 1.5 mils (3 coats)

Dwell Time of Contaminant……………………..1 hour, 4 hours and 24 hours under watch glass

CHEMICAL RESISTANCE DATA

Resistance

Key 1 – Destroyed
Key 2 – Severe Attack With Staining Or Dulling
Key 3 – Minor Attack With Staining Or Dulling
Key 4 – Intact With Minor Stain Or Dulling
Key 5 – No Effect
NT – Not Tested

Contaminant 1 Hour 4 Hours 24 Hours
Mustard 4 4 3
Ketchup 4 4 3
Olive Oil 5 5 5
Vinegar 4 4 4
Water 5 5 5
Lemon Juice 5 5 5
Pickle Juice 5 5 5
Tea 5 5 5
Balsamic Vinegar 5 5 5
V8 Juice 5 5 5
Orange Juice 5 5 5
Coffee 5 5 5
Cola 5 5 5
Red Wine 5 5 5
Mayonnaise 5 5 5
Transmission Fluid 5 5 5
Motor Oil 5 5 5
Anti-Freeze 1 NT NT
Brake Fluid 1 NT NT
10% NH4OH 5 5 5
10% NaOH 2 2 1
10% HCI 5 5 5
10% KOH 5 3 2
Household Bleach 4 4 4
3% Hydrogen Peroxide 5 5 5
Isopropyl Alcohol 2 1 NT
Ethanol 1 NT NT
Gasoline 3 3 2
Urine 5 5 5

Surface Solutions warrants this product to be of consistent quality. Surface Solutions warranty is limited to the replacement of product proven defective. The user assumes all other risks and liabilities resulting from the use of this product. If you have any questions, please call Surface Solutions at (888) 842-3356 or info@totalsurfacesolution.com.

earth day, eco stone, Eco-friendly, energy conservation, environmentally friendly flooring, go green, hybrid, sustainable living

The post PROtecSG High Gloss Protective Micro-Guard Data Sheet first appeared on Flooring Supply Shop Blog.

Leave a Reply

Your email address will not be published. Required fields are marked *

Chat with us Chat