Satisfaction guaranteed. Call us anytime: 1-877-880-TILE (8453).
Cart: 0 items, $0.00

Your shopping cart is empty.

Checkout

Step by Step Guide to Refinishing your Bathtub

November 4, 2013

Do it Yourself, DIY, Home Improvement, home remodeling, flooring supply, bathroom remodeling, shower remodeling

Step by Step Guide to Refinishing your Bathtub

Whether you love do-it-yourself projects or are on a budget and need to do some refurbishing on your own, it`s not hard to refinish a bathtub and you`ll be surprised that you can get it done in a reasonable amount of time. Pretty soon you`ll have a beautiful new tub that will bring new life to your bathroom. It can be a focal point, or you can blend the tub with paint, tile, linens and d?cor that tie the entire room together seamlessly.

Materials:

Abrasive tub cleaner
Paint
Epoxy
Abrasive cleaning pad
Paintbrush
Paint roller
400 to 600 grit wet sandpaper

Step 1

Before doing anything else, you need to clean your tub. Remove any non-slip materials with degreaser. Use a scrubber to thoroughly wash the tub and remove all debris, dirt and other items. Don`t worry about scratching the tub because you won`t be able to tell once your refurbishing project is finished. Rinse the cleaning fluids from the tub once you`re finished so that your paint has a prime surface to adhere to.

Step 2

Sand the tub using 400 to 600 grit wet sandpaper. This serves a couple of purposes. It gets rid of any leftover cleaner on the surface and it gives the new coating a solid place to stick. Make sure you get wet sandpaper because it`s much easier to wash away as you work.

Step 3

Mix the new paint for the tub with epoxy. Make sure the two are very well combined. Look for a kit that makes it easy to combine the correct ratio of paint to epoxy so you don`t damage your tub or have to start the project over. A kit is also a great way to make sure you buy the proper type of paint so you don`t mistakenly end up with something that doesn’t hold up well to contact with water. These kits come in several sizes, allowing you to get just as much product as you need to get the job done.

Step 4

Use a paintbrush to apply the paint to the surface of the tub. Paint in one direction only and apply several thin coats rather than one thick one. Allow an hour or so of drying time between each coat.

Step 5

Use a coordinating color of caulk and apply an even line around the tub, making sure to get the corners. Smooth the caulk as you go to get an even looking appearance. Wait a day or two before using the tub to be sure the paint and caulk is completely dried.

Tips and Tricks

Before getting started with your bathtub refinishing project, it`s a good idea to protect the other surfaces in your bathroom so you don`t have damage or costly repairs to deal with. Put a drop cloth over the toilet and the floor surrounding your tub. That way, if caulk or cleaner splashes or drips, clean-up is easy and you won`t mistakenly ruin something else. Remove all towels, rugs and wall art from the bathroom as well. This will keep them out of the way and protect them from damage.

Once you`re done with the tub refinishing, replace the bathroom essentials, or shop for new items to go with your new and beautiful bathtub. Shop online or in stores for new linens,  wall art and decor items that will make your bathroom look stunning in no time. Consider a new color combination, such as gray and yellow, blue and coral or white and gray to give your bathroom an elegant and classy look. All of these choices look great with a bright white bathtub.

Copyright © 2013 FlooringSupplyShop.com

The post Step by Step Guide to Refinishing your Bathtub first appeared on Flooring Supply Shop Blog.

bathroom remodeling DIY do it yourself Flooring Supply home improvement Home remodeling shower remodeling

One thought on “Step by Step Guide to Refinishing your Bathtub

  1. My husband and I are wanting to have our bathtubs refinished, and are curious to know the best way to go about doing it. I like how you pointed out that the one of the first things we need to do is clean the tubs. Which makes sense, so that when we start the process that the paint has a prime surface to adhere to.

Leave a Reply

Your email address will not be published. Required fields are marked *

Chat with us Chat