Like other parts of the house, hardwood flooring also requires maintenance. Over the years, with constant wear & tear the floor starts losing its luster. Though, a lot of people resort to changing the flooring when it starts to wear down; this however is not an advisable option.
One of the most effective ways of dealing with worn out flooring is by buffing it. One can easily use buffing for refinishing the floor, so that it looks as good as new.
Instead of replacing the old hardwood flooring with a new one, most homeowners prefer buffing the flooring, which saves them time as well as money. Using harsh chemicals is not advisable as it will actually harm the floor by either staining it or affecting its natural sheen. Buffing on the other hand is safer and can help keep the fresh look of the floor, as if it was new. Moreover, buffing can be easily done on every type of flooring, whether it is marble or hardwood, with the help of a buffing machine. In case of carpet flooring, one can use the brush attachment instead of pads in the buffing machine; which effectively cleans and scrubs the carpet thoroughly.
It is a process, which can easily be accomplished by DIY enthusiasts. Whatever may be the type of floor you wish to buff; it should first be dust mopped and cleaned thoroughly. Next, you need to install the buffing pad and set the speed of the machine at 1-2 ft. per second. Move the machine in a straight line, overlapping each pass by 2-4 inches. You need to buff the floor till the required gloss is achieved. Similarly, repeat the whole process in other areas of the floor as well. Check the pads, and change them in case they have become dirty or worn out. After buffing is complete, dust mop the floor and follow it by wet vacuuming. Make sure to clean all the equipment, before storage.
Although it is easy, there are certain things that one needs to take care of while buffing the hardwood floor. Replace worn out pads as it can cause scratches on the floor. You need to select the appropriate pad and solution for the type of floor to be buffed. It is advisable that you evenly spread the solution over the particular section of the floor, and buff the area two to three times for best results. While buffing the floor, you must ensure to start from the end of the room, moving backwards, so that you do not step on the cleaned floor.
You will need to apply three different solutions, namely stripping, wax and polish solution. Though using a floor buffing machine is not very difficult; it is advisable to exercise caution since the buffing machine is quite big in size.
Flooring is the most essential part of any house and hence, requires utmost care. By just following some of the simple measures mentioned above, you can have a clean, shiny and durable flooring.
Copyright © 2010 FlooringSupplyShop.comdo it yourself Flooring Supply hardwood flooring hardwood refinish Laminate Reclaimed hardwood