Alpha Cutting System Overview

Alpha® Cutting System Overview

DRY CUTTING BLADE SELECTION GUIDE

Blades	Specialty	Building Stone Fabricators	Tile Contractors	Monument Builders	General Contractors	Specialty Contractors
Plus	Granite & Harder Materials	HR	R	HR	R	R
Quad	Flush Cutting	HR	R	HR	R	R
Quad Segmented	Flush Cutting	R	NR	HR	R	R
Libero	Marble	HR	HR	R	R	R
Eclipse II	General Purpose	HR	R	R	HR	R
Tuck Point	Tuck Pointing	NR	NR	NR	R	HR
Katana	All Tile	R	HR	R	R	R
Contour	Curved Applications	HR	R	NR	NR	R
Contour for Marble	Marble	HR	R	NR	NR	R
Contour for Porcelain	Porcelain	HR	R	NR	NR	R
Vortex	Flush Cutting	HR	R	HR	NR	R
Vortex for Marble	Flush Cutting	HR	R	R	NR	R
Hot-Rod	Channel Cutting	HR	NR	R	R	R

WET CUTTING BLADE SELECTION GUIDE

Blades	Specialty	Building Stone Fabricators	Tile Contractors	Monument Builders	General Contractors	Specialty Contractors
Silencer III	Granite	HR	R	HR	R	R
Silencer III	Marble	HR	R	HR	R	R
Silencer III	Porcelain	HR	R	R	R	R
Silencer III	Engineered Stone	HR	HR	HR	R	R
Numero Uno	Engineered Stone & Natural Stone Tile	R	HR	NR	R	R
Knock Out	Granite	HR	NR	NR	NR	R
Porcellana	All Tile	R	HR	HR	R	HR
Metalgres	Glazed Tiles	R	HR	HR	R	HR
Typhoon	Ceramic Tile and Marble Tile	R	HR	NR	R	R
Sonic	Ceramic Tile	R	R	NR	R	R
Vetro	Glass Blade, Tile & Stone	NR	HR	NR	R	HR
BT	Tile Blade for Cordless Saw	NR	R	NR	R	R
BG	Glass Blade for Cordless Saw	R	R	R	NR	HR
Marble Profile Wheel	Cut & Profile Tile	R	HR	NR	R	R

KEY: HR = Highly Recommended R = Recommended NR = Not Recommended

Alpha® Dry Blades may also be used wet providing the specified RPM is maintained. However, Alpha® Wet Blades may not be used dry with exception of the Alpha® Sonic (part numbers TS04AL and TS05AL).
In all cases, it is important that the application meet the defined use for that specific blade.
Different sizes are available for various applications.
Please refer to the specific page number to determine which sizes are available.