Miracle MiraPolish - 4 Lbs
Natural Stone Polishing and Restore Creme
Easy To Use Polishing Creme For:
• Marble • Travertine • Limestone • Terrazzo • Granite • Calcium Based Stone
MiraPolish is a unique, natural, non-wax creme compound for the polishing and restoration of most marble, travertine, limestone, terrazzo, granite and other calcium base natural stone surfaces. When used properly, MiraPolish™ will give a long lasting luster, while removing scratches and etch marks. MiraPolish™ is great for easy ongoing maintenance, as well as the final polishing step in any stone restoration procedure. Heavy scratches and etch marks may need to be removed using Miracle Sealants Pre-Dust, Mira Hone or with Pyramid Diamond Abrasives.
Directions
Always read the entire label, product data sheet and material data sheet before using. Select an area of about 40 square feet.
a. All previous applied sealers, coatings and/or waxes must be removed using Mira Strip or H2O Strip as directed.
b. If the surface is dirty scrub using Mira Clean #1 as directed.
c. If the floor is very dirty or old (typically 5 years or more), use Liquid Poultice as directed for optimum results.
d. Apply a small amount of water to the surface. Do not work large areas.
e. Apply about a cup of MiraPolish™ in the center of the area to be worked.
f. Attach a red, white or natural (hog hair) pad onto the Marble Master MM 1000 floor machine. Buff in a side-to-side motion. The consistency of the slurry should be fluid enough to achieve even coverage over area.
g. If slurry becomes dry, add water as needed.
h. After making several passes, move slurry aside with a squeegee. Check for desired luster. Work longer for additional luster. When the desired luster is achieved, squeegee the MiraPolish™ slurry to the next section and add MiraPolish™ and water as needed. DO NOT ALLOW MiraPolish™ DRY ON THE SURFACE.
i. Rinse the surface with clean water and remove with a wet vacuum. This procedure will remove any residue.
k. Complete large areas in a checkerboard fashion making sure to overlap sections to blend.
• Easy to Use • Fast Acting • Cost Effective • Removes Light Etch Marks • Non Acidic Formula • Pleasant Scent • Removes Light Scratches • Non-Wax Creme
Product Description
Mira Soap is a unique natural stone soap designed for cleaning and maintaining stone containing calcium. Mira Soap reacts with the calcium in terrazzo, limestone, marble or concrete to produce a protective layer that helps resists wear to the surface. As the protective shield is worn away, it will be repaired during the next cleaning cycle.
Because Mira Soap reacts with calcium in the surface there is no risk of buildup. Once the surface is dry, it can be buffed with a floor machine using a white pad or polishing brush to increase the shine. Mira Soap is excellent for regular maintenance and will
Always Sample Testing
Due to the differences of each substrate, several inconspicuous test patches should be completed to assure maximum performance. User must determine the suitability of the product for their intended use.
Ongoing Maintenance
The MiraPolish™ finish will vary from situation to situation and stone to stone. Use MiraPolish™ as directed for ongoing polish maintenance. Refer to Miracle Sealants Care Guides for additional information..
Water, Stain & Slip Protection
To protect cleaned area from future soiling and staining and increase static coefficient of friction, we recommend applying the appropriate Miracle Penetrating Sealer/Impregnator.
Mold, Mildew and Bacteria Sanitation
For best results in killing mold, mildew, bacteria and other micro organisms, use Miracle Wipes as directed.
Read entire label and PDS/MSDS before using.
Coverage: Coverage will vary depending on the density, porosity, texture, surface absorption, time solution left on the surface, weather and application methods.
Used as directed, MiraPolish™ will cover approximately 350 - 500 square feet per 4.5 pound container (32.5 - 46 square meters).
Model: 753927513121
