Mira Soap - Quart
Cleans & Protect Non-Polished, Honed & Textured Limestone & Marble and other surfaces
Professional Grade - No Rinse - Easy to Use - Biodegradable - Natural Protection - Safe for regular use
Deep Cleaning Action for Most Surfaces Including
• Sanded Grout • Non-sanded Grout • Quarry Tile
• Clay Pavers • Limestone • Ceramic Tile
• Glazed Tile • Granite • Marble
• Terrazzo • Brick • Slate
• Travertine • Concrete • Masonry
Mira Soap is a specially formulated no rinse stone soap designed for easy ongoing maintenance of honed, tumbled, textured limestone, marble, travertine, terrazzo and other stone containing calcium. Mira Soap produces a protective film that protects the surface of the stone. Mira Soap only reacts with the calcium in the stone so there is no risk of buildup like a traditional floor coating. Non-textured surfaces can be buffed with a floor machine and white nylon pad for added patina or shine.
Product Description
Mira Soap is a unique natural stone soap designed for cleaning and maintaining stone containing calcium. Mira Soap reacts with the calcium in terrazzo, limestone, marble or concrete to produce a protective layer that helps resists wear to the surface. As the protective shield is worn away, it will be repaired during the next cleaning cycle.
Because Mira Soap reacts with calcium in the surface there is no risk of buildup. Once the surface is dry, it can be buffed with a floor machine using a white pad or polishing brush to increase the shine. Mira Soap is excellent for regular maintenance and will
Always Sample Testing
Due to the differences of each material, several inconspicuous test patches should be completed to assure maximum performance. User must determine suitability of the product for their intended use.
MAINTENANCE
For ongoing maintenance instructions please refer to Miracle Sealants Care Guide. Refer to the Miracle Sealants Product Recommendation Chart for specific product recommendations.
Application Instructions:
Always dry dust mop or sweep area to be cleaned before applying Mira Soap. During the first six months, damp mop the surface with Mira Soap and water on a regular basis by mixing 1 part Mira Soap to 10 parts water.
After six months, maintain area by damp mopping with a ratio of 1 part Mira Soap to 20 parts water. When the solution becomes dirty or cloudy, replace it. Do not rinse Mira Soap off the floor. Use as directed in proper solution and allow to dry.
Light buffing with a floor machine (175 - 2000 rpm) and white pad or soft brush will improve the shine. Allow Mira Soap to dry for at least 45 minutes before buffing. Mira Soap is also effective on counters and vertical surfaces.
Water, Stain & Slip Protection
To protect cleaned area from future soiling and staining and increase static coefficient of friction, we recommend applying the appropriate Miracle Penetrating Sealer/Impregnator per specification, prior to first application of Mira Soap.
Mold, Mildew and Bacteria Sanitation
For best results in killing mold, mildew, bacteria and other micro organisms, use Miracle Wipes as directed.
Read entire label and PDS/MSDS before using.
Coverage: will vary depending on density, porosity, texture, surface absorption, weather, time solution left on surface and application methods. Used as directed, Mira Soap will clean from 1000 - 7,000 square feet per gallon.
Model: 753927511141
