Powerful Stone and Tile Cleaner - Quart
EcoStone Solutions Powerful Stone & Tile Cleaner is a heavy duty alkaline restoration cleaner that quickly removes floor finish, wax, water-based acrylic sealers, soap scum, dirt, algae stains, mildew stains, greasy film and deposits. This product was formulated to thoroughly clean and degrease neglected natural stone, masonry, ceramic & porcelain tile and grout.
Environmentally Friendly
Concentrated alkaline formula to cut through heavy soils and grease
Safe on all stones and tile, will not damage any stone
Professional strength formula
Superior restoration cleaner
Available in quarts, gallons and 5 gallons
For use on:
Ceramic Tile - Porcelain Tile - Grout - Clay Products - Marble - Granite - Limestone - Slate - Terrazzo - Saltillo - Sandstone - Travertine
Coverage:
150 SF (15 Sq meters) or more per diluted gallon depending on the dilution selected, the porosity and texture of the material, method of application, humidity, and surface temperature.
Directions
Always test in an inconspicuous area before general use & refer to product label for complete information. Dilute with warm or hot water. Do not mix with other chemicals.
1. Make sure surface is clean, vacuuming or sweeping off all debris.
2. Mask off and protect areas such as baseboards or adjacent surfaces not intended for treatment.
3. Apply solution with a sponge, mop, or low-pressure sprayer. Allow product to dwell for 3 minutes and then agitate with a scrub brush or pad. To remove stubborn stains or encrustations, allow solutions to remain on surface for 5 minutes. Do not allow product to dry on surface.
4. Remove solution with a sponge, mop, wet towel or a wet vacuum. Rinse surfaces thoroughly with clean water after use and wipe dry.
5. Clean and rinse equipment with
- Biodegradable
- VOC compliant in all states
- Environmentally responsible
- Easy to use and low odor
- No phosphates
- Deodorizes surfaces as it cleans
- This product may help you achieve LEED certification
MSDS
Model: PS12Q
