Eco Friendly Enhance and Protect Quart

Enhance & Protect - Quart

EcoStone Solutions Enhance and Protect is a premium water based impregnating treatment that darkens surfaces to enhance and restore the appearance of dull, worn or weathered stone, while
providing exceptional stain resistance. Contains unique actives and is suitable for use on natural stone including slate, tumbled stone, clay based products and other porous masonry surfaces including grout.. Product allows vapor transmission, contains no petroleum distillates or chlorinated solvents and is VOC compliant.

Environmentally Friendly

• Enhances and protects all in one step
• For all stones that need appearance enrichment
• Covers up to 1000 sf per gallon
• Interior and Exterior use
• Available in quarts, gallons, and 5 gallons
• Easy to use, minimal if any residue issues
• Environmentally preferred over traditional stone care products

For use on:

Travertine Marble - Clay Products - Grout - Granite - Limestone - Slate - Sandstone

Coverage:

300-1500 SF (30-141 Sq meters) per coat per gallon depending on the porosity and texture of the material, method of application, humidity, and surface temperature.

Directions

Always test in an inconspicuous area before general use & refer to product label for complete information.
1. Make sure surface is clean, vacuuming or sweeping off all debris.
2. Mask off and protect areas such as baseboards or adjacent surfaces not intended for treatment.
3. Make sure surface is clean and dry prior to application.
4. EcoStone Solutions Enhance and Protect may be applied to damp surfaces 4 hours after moisture has been removed.
5. Apply an even coat using a paint pad, paint brush, paint roller, or low-pressure sprayer delivering a coarse wet spray.
6. Allow penetration for 10-15 minutes, then wipe off all remaining product immediately.
7. Apply a second coat if a darker appearance is desired.
8. A full cure can be expected in 48-72 hours. Foot traffic can begin after 4 hours.
9. Reapply Enhance and Protect as needed for periodic maintenance.
Test before usage to prevent residue formation. This will depend on sun exposure, maintenance procedures.

MSDS