Basic Impregnator - Quart
EcoStone Solutions Basic Impregnator is an impregnating, natural look, water based stain protection formula for all stones. Effective for showers, grout, and outdoor areas. Allows vapor transmission.
Environmentally Friendly
- Standard protection for all stone
- Not a polluting petroleum solvent based formula
- Excellent exterior sealer (minimizes efflorescence)
- Great grout sealer
- Use in bath and showers
- Suitable grout release for new installations
- Effective water protection and resists oil stains
- Weather resistant
- Covers up to 1000 sf per gallon
- Interior and exterior
- Available in gallons and 5 gallons
- Easy to use
- Environmentally preferred over traditional stone care products
For use on:
Travertine - Marble - Clay Products - Grout - Granite - Limestone - Slate - Sandstone
Coverage:
200-1000 SF (20-94 Sq meters) per coat per gallon depending on the porosity and texture of the material, method of application, humidity, and surface temperature
Directions
Always test in an inconspicuous area before general use & refer to product label for complete information.
1. Make sure surface is clean, vacuuming or sweeping off all debris.
2. Mask off and protect areas such as baseboards or adjacent surfaces not intended for treatment.
3. Make sure surface is clean and dry prior to application.
4. EcoStone Solutions Basic Impregnator may be applied to damp surfaces 4 hours after moisture has been removed.
5. Apply an even coat using a paint pad, paint brush, paint roller, or low-pressure sprayer delivering a coarse wet spray.
6. Allow penetration for 10-15 minutes, then wipe off all remaining product immediately.
7. A full cure can be expected in 48-72 hours. Foot traffic can begin after 4 hours.
8. Reapply Basic Impregnator as needed for periodic maintenance this will depend on traffic patterns, sun exposure, maintenance procedures, etc. Test before usage to prevent residue formation.
Test before usage to prevent residue formation. This will depend on sun exposure, maintenance procedures.
- No chlorinated solvents
- No petroleum distillates
- VOC compliant in all states
- Environmentally responsible
- Easy to use and low odor
- Excellent protection against the toughest oil and water-based stains
- This product may help you achieve LEED certification

MSDS
Model: BI12Q