ProMelt Snow Melting Cables

SunTouch® ProMelt™ Snow Melting Cables System

from 10 to 150 sq. feet. Multiply spool can be combined to cover larger areas

Snow melting cable on a spool. Perfect for complex or divided shapes and large areas.

SunTouch ProMelt products are a simple way to eliminate snow and ice from stair way, drive way, entry way and more.

ProMelt Cable is a complete heating cable consisting of a series resistance heating cable and a single power lead for easy single-point connection. The heating cable length cannot be cut to fit.

Specifications for ProMelt Cable:

Voltages: 120, 208, 240, 277 VAC, 1-phase
Watts: 50 W/sq. ft (170 Btu/h/sq. ft), spaced at 3 inches on-center
38 W/sq. ft (130 Btu/h/sq. ft), spaced at 4 inches on-center
(Cable is designed to operate at approximately 12.5 W/linear foot of cable at rated voltage.)
Maximum heater current: 24 amps
Maximum circuit load: 50 amps
GFCI Class B (ground fault equipment protection) required for each circuit
Listing: ETL Listed for U.S. and Canada under UL 515, IEEE 515.1, and CAN/CSA C22.2 No. 130-03
Listing file number: 3151992
Application: outdoor use only, embedded in concrete, asphalt, sand (see Step 1.1)
Minimum bend radius: 1 inch
Maximum exposure temperature (continuous and storage): 221°F (105°C)
Maximum exposure temperature (short-term for asphalt covering): 285°F (140°C)
Minimum installation temperature: 40°F (4.5°C)

Follow these recommendations when selecting ProMelt Cables:

1. Determine what voltage will be used: 120VAC, 208VAC, 240VAC, or 277VAC.

2. Determine the heat output. The climate and amount of snowfall will dictate this choice. In general, most systems will require 50 Watts/Sq. Ft. spacing to melt snow and ice. Some residential or light commercial systems in temperate climates may need only 38 Watts/Sq. Ft. spacing.

3. Determine the square footage of the area to be melted. Do not include areas under built-ins like planters or similar obstructions. Stay 3-6" from edges of slabs and do not cross expansion joints if possible. Add up all the areas to be melted and round down the nearest mat size(s) to fill the area. Either 2'-wide or 3'-wide mats can be selected.

Free Shipping on all our ProMelt Snow Melting Systems by SunTouch.

Only at flooringsupplyshop.com Lowest Price Guarantee click here for full detail

Only at flooringsupplyshop.com everything in stock and ship same day

Not sure what and how many you need, we here to Help
Contact flooringsupplyshop.com by Phone 877-880-8453 (TILE) , Email, or Fax, or stop by our store with the layout of your room and we will give you complete list of what you need.

Click on our Flooring Calculator to calculate not just how many electrical floor heaters you need, you can also see how much it will cost you daily or yearly, and adjust your uses base on your electrical floor heating budget.

We are not and Internet-based store like most of our competition, we have a physical store showroom, warehouse based in Los Angeles, CA . We welcome our customers and website visitors to our store.

Store hours 7:00 am - 5:00 pm Mon - Fri, and 12:00 Noon - 4:00 pm Sunday

We ship same day any order received until 4:00 pm, (PST) any next day or 2nd day order coming up to 4:45 pm (PST) will also be ship same day.

SunTouch ProMelt Installation Manual

SunTouch 25 years Warranty