Miracle Tile and Stone Cleaner

Starting at: $9.10
Container Size

Qty:
Item is in stock

Description

Miracle Sealants Tile n Stone Cleaner

Also known as Miracle Mira Clean No 1

Available Gallon and Quart

Deep Cleaning Action For Most Surfaces Including

  • Sanded and Non-sanded Grout
  • Quarry Tile
  • Clay Pavers
  • Limestone
  • Ceramic Tile
  • Glazed Tile
  • Granite and Marble
  • Terrazzo
  • Brick and Slate
  • Travertine
  • Concrete and Masonry

Miracle Sealants Tile n Stone Cleaner is a concentrated cleaner designed for all surfaces. Strong enough for the professional, yet gentle enough for the do-it-yourself specialist. Mira Clean #1 is a nontoxic cleaner that can handle the most difficult stains, yet is gentle enough for everyday use.

Miracle Sealants Tile n Stone Cleaner is a non acidic cleaner & degreaser developed specifically for tile, grout, natural & cast stone and masonry surfaces. Miracle Sealants Tile n Stone Cleaner will handle difficult stains, yet is gentle enough for everyday use. Miracle Sealants Tile n Stone Cleaner is very effective as an ongoing maintenance cleaner for surfaces previously sealed with the appropriate Miracle Penetrating Sealer/Impregnator. Miracle Sealants Tile n Stone Cleaner will not harm the polish on polished stone surfaces.

SPECIAL FEATURES:

• Safe for Regular Use • Interior & Exterior • Less Expensive • Easy to Use

Application Instructions

Miracle Sealants Tile n Stone Cleaner is concentrated and requires dilution.

To remove difficult stains such as oil and grease, mix one part Mira Clean #1 with 3 parts hot water (cold water can be used but cleaning action will be reduced).
Apply Mira Clean #1 with a clean mop or self-feeding floor machine. Allow the solution to stand for 10 minutes while agitating periodically with the appropriate scrub brush. DO NOT allow solution to dry on the surface. Extract all the dirty remains with a wet vacuum system. Rinse the surface thoroughly with hot water and allow to dry. Difficult stains may require a second application.
If area is still dirty after the second cleaning use Liquid Poultice, Phosphoric Acid Cleaner, Sulfamic Acid Crystals, Porcelain & Ceramic Tile Cleaner, or GCFR (Grout & Concrete Film Remover) as directed.

For general cleaning, mix one cup Mira Clean #1 with 3 gallons hot water following the same instructions as before.

Heavy Duty Cleaning: Use Phosphoric Acid Cleaner , GCFR, and Porcelain & Ceramic Tile Cleaner as directed.

Coverage: 1,000 - 10,000 square feet per gallon (90 - 900 square meters per 3.785 liters). Container sizes: Gallon, quart, 32 oz. spray bottle.

 

Details

  • Model: 753927511097

Reviews

Be the first to write a review. Write a review.

Tags