Miracle Sealants Mira Matte

$15.40
Qty:
Item is in stock

Description

Miracle Sealants Mira Matte - Quart

Natural Stone Color Enhancer

Color Enhancement for Textured Stone Surfaces Including:

• Flamed Granite • Cleft Faced Slate • Flamed Limestone • Tumbled Marble • Textured Cast Stone • Textured Natural Stone

Mira Matte is a unique product designed to enhance the natural color of all flamed, sandblasted, split faced, tumbled and textured surfaces. When used with one of our penetrating sealers, Mira Matte seals and protects while leaving a beautiful, low maintenance, color enhanced satin sheen.

Mira Matte allows vapor to escape while offering a scuff and weather resistant surface. Mira Matte is U.V. transparent, will not yellow and can be used on both interior and exterior applications.

Features

  • Interior & Exterior
  • Easy to Use
  • U.V. Transparent
  • Non-Yellowing
  • Weather Resistant
  • Superior Coverage

New Installations - Application Instruction

Before Grouting: Apply Miracle Penetrating Sealer to all surfaces. This step will allow quick and easy cleanup after grouting. Grout can stain many surfaces if this procedure is not used. Apply Miracle Penetrating Sealer using a Mira Brush Applicator or a clean white towel.
Apply enough to wet the surface. Be careful not to saturate the open grout joints. Allow Miracle Penetrating Sealer to stand for approximately 1 - 5 minutes for maximum penetration. Any excess sealer remaining at this time should be removed by wiping the surface with a clean dry towel.
Typically we do not recommend a second application of sealer when utilizing Mira Matte. Allow Miracle Penetrating Sealer to dry 6 - 12 hours before continuing with the grouting procedure per manufacturers specification.

After Grouting: Once grouted make sure that all grout residue is removed from the surface with a clean sponge and water. Allow grout joints to dry at least 24 hours. If grout clean-up is not performed effectively, additional cleaning may be necessary to remove remaining grout residue or haze. For this procedure use HDAC (Grout, Concrete & Film Remover) (hydrochloric acid), Phosphoric
Acid Cleaner or Epoxy Grout Film Remover as directed. Once the area has completely dried, proceed with the sealing of the grout for water and stain resistance. Apply Miracle Penetrating Sealer to all grout as directed. Allow sealer to dry a minimum of 1 hour. Apply Mira Matte to the entire surface using a natural fiber brush, terry cloth towel or pump sprayer (exterior use only). If a pump sprayer is used, Mira Matte should be evened out with a brush before it dries. Work small areas 30 - 60 square feet (3 - 6 square meters) at a time. Do not allow Mira Matte to puddle on the surface. Multiple applications may be necessary to achieve the desired results. Proceed with subsequent applications after the previous application has dried to the touch (approximately 1 - 2 hours). Be sure to even out Mira Matte on the surface, blending in overlap marks.

Existing Installations - Application Instruction

Follow the application instructions previously mentioned, except now, seal the grout joints at the same time as the rest of the tile or stone surface. When treating surface and grout at the same time, make sure all grout joints are saturated with Miracle Penetrating Sealer. Once the sealer is dry to the touch (1 - 2 hours), proceed with the application of Mira Matte color enhancer as previously mentioned. For added color where maximum stain repellent is not required, use Mira Matte by itself.

Cure Time Mira Matte will be dry to the touch in 2 - 4 hours and may be used for normal foot traffic. For optimum results the area should be kept dry and free from staining materials for 72 hours.

Coverage: Coverage will vary depending on the density, porosity, texture, surface absorption, weather, time solution left on surface and application methods. Used as directed, Mira Matte will cover approximately 50 - 200 square feet per quart (4.5 - 8 square meters per .948 liters).

MSDS

 

Details

  • Model: M-MIRAMATTE

Reviews

Be the first to write a review. Write a review.

Tags