Quick Pitch Float System – Specifications
For ‘Goof Proof’ shower floor construction
The Quick Pitch® Float Stick System permits easy construction of shower floors with the proper minimum water drainage slope of 1/4" per 12" run. With this time-saving system there is now no chance for an error in measurement, or the need for a level, to achieve a properly sloped shower floor.
The Quick Pitch® Float Stick System uses a Center Ring and tapered Float Sticks to assure the correct drainage slope in standard or custom shower areas with walls up to 6' in any direction from the floor drain.
This system does not add to the pan liner preslope as the Center Ring sits on top of the drain flange bolts.
Easy to install
Shower floor preparation is easy as the Center Ring is placed over
the drain, the Float Stick layout and length are determined and installation
proceeds with the Float Sticks in place guaranteeing proper
drainage. The Center Ring has 24 Standard Float Stick attachment
slots spaced every 15°, a 3 5/8 " inside diameter and is 1" high.
The Float Sticks are available in both Standard (these connect to the Center Ring, have a 1" to 1 3/4" taper and cover the first 36” from the floor drain) and Extended (these connect to the Standard Float Sticks, have a 1 3/4" to 2 1/2 " taper and cover any area from 36" to 72" from the floor drain) length sizes and are both 1/2 " wide x 36" long.
Standard Float Stick Attaches to Center Ring
Extended Float Stick Attaches to Standard Float Stick
The Float Sticks have holes in their vertical web which help to act as floor reinforcement, and both sticks are also easily cut to length with a hacksaw.
All three components are made of molded plastic and become a permanent part of the shower floor.
Available as a kit and as additional components
The Quick Pitch® Float Stick System is available in both kit form for standard 36" x 60" shower areas, and component form for larger and custom shower areas.
All are supplied with illustrated installation instructions.
No. QPK-101 Quick Pitch® Standard Kit
For standard 36" x 60" shower areas with a centered drain, or custom shower areas where the drain is within 36" of each wall. Included in each package is one each Center Ring and 6 each
Standard Float Sticks (1" to 1 3/4" taper x 36" long) that attach in any of the 24 slots on the Center Ring.
Quick Pitch® Components
No. XFS-101-2 Quick Pitch® Standard Float Sticks — These are the Standard Float Sticks (1" to 1 3/4" taper x 36" long) that are supplied in the No. QPK-101 Quick Pitch® Standard Kit, and they attach directly to the Center Ring. These ‘extras’ are generally needed for use in custom shower areas with either curved, or more than four, walls. Sold 9 each per package.
No. EFS-103 Quick Pitch® Extended Float Sticks — These Extended Float Sticks (1 3/4 " to 2 1/2 " taper x 36" long) attach to the 1 3/4" end of the Standard Float Sticks. They are for use in shower areas where the walls are more than 36" (but less than 72") from the floor drain. Sold 8 each per package.
No. QPCR-104 Quick Pitch® Center Ring — This is the Center Ring that is supplied in the No. QPK-101 Quick Pitch® Standard Kit to which the Standard Float Sticks (1" to 1 3/4 " taper x 36" long) attach.Separate Center Rings are often needed to make use of ‘leftover’ Standard Float Sticks.
We at flooringsupplyshop.com thank you for your purchase of Quick Pitch® and are confident you will be pleased with its performance.
More links about Quick Pitch System
How to Install Pre Pitch System - Quick Pitch with Composeal Vinyl - Quick Pitch Specifications - How to Install Kirb Perfect - StringA Level - How to Install Handi-kirb - Quick Pitch System Estimator - Ebbe Square Drain with Quick Pitch