Heavy Duty Drive Plates
  • Heavy Duty Drive Plates
  • Heavy Duty Drive Plates

Heavy Duty Drive Plates

Starting at: $442.00
Qty:
Item is in stock

Description

Heavy Duty Drive Plates

Heavy duty, precision cut steel 30 to 90 lb weighted drive plate and pad driver.

Use of drive plate helps provide the following:

  • Flatter cutting
  • Uniform finish
  • Better polishing
  • Lower Amperage draw
    Prevent breaker outages
    Prevents wear on machine

Recently upgraded and manufactured using extreme heavy duty metal clutch plate, tall riser, and aircraft grade bolts.

Precision CNC water jet cut special steel plate for increased flatness and balance of your rotatory machine.

Attaches to a 175 RPM and 1.5 horse power rotary floor machine using a universal clutch plate.

Powder coated for durability and long lasting finish

Industrial grade Velcro for extra strength to hold pads in place (Use of a small spatula or putty knife to separate the diamonds and pads from the Velcro is the recommended way to remove them)

Sizes

Drive Plate 17"

30lbs, 1/2 inch thick - Used for light duty cutting and polishing on softer stones
60lbs, 1 inch thick - Used for heavier cutting and polishing on harder stones
90lbs, 1 ½ inches thick - Used for lippage removal, granite cutting, and faster cutting on other stone surfaces (non stock item)

Drive Plate 20"

45lbs, 1 inch thick

Riser

1 ½" thick industrial foam spacer to go between drive plate and abrasive diamonds, cheetah pads and cheetah pucks.

The risers allow your rotatory machine to run smoother, handle better, and to provide shock absorption to prevent chipping, cracking, and breaking of stone tiles.

Eco pad, stone polishing pads, earth day, eco stone, Eco-friendly, energy conservation, Environmentally friendly flooring, go green, hybrid, sustainable living

Made in the U.S.A

Eco friendly Instruction for polishing Granite and Marble - Video

 

Details

  • Model: DP17-30L

Heavy Duty Drive Plates

17" 30 lbs 1/2 inch thick. Light duty cutting and polishing on softer stones

17" 60 lbs 1 inch thick, Heavier cutting and polishing on harder stones

17" 90 lbs 1 1/2 inch thick, Lippage removal, granite cutting, and faster cutting on other stone surfaces

20" 45 lbs 1/2 inch thick

Manufactured using extreme-duty metal universal clutch plate, tall riser, and aircraft grade bolts.

Precision CNC water jet cut special steel plate for increased flatness and balance of your rotary machine.

Attaches to 175 RPM and 1.5 horse power rotary floor machine.

Powder coated for durability and long lasting finish.

Industrial grade Velcro for extra strength to hold pads in place. (Use of a small spatula or putty knife to separate the diamonds and pads from the Velcro is the recommended way to remove them.)

Our weighted drive plates turn almost any 1 ½ hp floor buffer into an efficient stone honing and polishing tool. Rather than using top weights, the bottom weight of the drive plates improves performance and efficiency by acting as a heavy flywheel. This means your honing is flatter, faster and more consistent, and your machine doesn’t work as hard due to the centrifugal force of the heavy steel plate.

For lippage removal it's recommend using a 60 lb. plate and either specific lippage removal diamonds if the lippage is extreme our using our 5” Cheetah Pucks. Most technicians will run 4 of our 5” underneath a 17” drive plate or 5 underneath of a 20”.

The 90 lb. are not generally needed and typically used with extreme damaged concrete and the motor of the machine needs to be a very strong motor to handle the 90 lb.’s. For the other weights it actually puts less wear and tear on the motor because the plate actually works like a fly wheel and centrifugal force takes over so they end up popping less breakers as well:)

Reviews

Be the first to write a review. Write a review.