www.flooringsupplyshop.com Flooring Supply Store


Setting Material Data and specification

Grout and Caulking Color chart, provide by www.tiledpeot.us flooring supply store in Los Angeles, we cary Tile, Hardwood floors, Stone, Tools for tile and stone, accessories for shower and more

Grout

MP Sanded 924

MP Nonsanded 923 is a one-part, latex-Portland cement grout with excellent flexural and bond strengths, color control, minimal efflorescence and high compressive strength. It is specifically designed for tile installations that will be subjected to thermal shock.

Applications

  1. Small joints that do not exceed 1/8"
  2. Interior or exterior applications with porous-bodied tiles where very smooth and narrow joints are required

Benefits

  • Just add water
  • Optimum in high wear, stain resistance and exceptional color uniformity
  • Improved workability

MP Sanded 924

MP Sanded 924 is a one-part, latex-Portland cement grout that provides excellent flexural and bond strengths, color control, minimal efflorescence and high comprehensive strength. It is specifically designed for tile installations that will be subjected to thermal shock.

Applications

  1. Medium to wide-joint installation
  2. Residential and commercial areas to perform under demanding job conditions

Benefits

  • Optimum in high wear, stain resistance and exceptional color uniformity
  • Just add water
  • Not affected by prolonged contact with water
  • Available in 40 standard colors

Cure Caulk 986

A superior quality siliconized acrylic latex caulk that is mold and mildew resistant.
The product forms a long-lasting, flexible, water tight seal that will resist cracking
on most building materials, including glass, wood, ceramic, metal and stone.
CureCaulk 986 is available in all of C-Cure’s grout colors.


Thinset

PermaBond FastSet 904
A factory blend of Portland cement, sand and special chemical additives which produce
an excellent, fast setting, dry-set mortar. PermaBond FastSet 904 enables the contractor
to set tile and grout within two hours so that he will have a finished installation which
can be open to foot traffic in 4 hours.


Pro Full Contact 907

Pro Full Contact 907 is specifically formulated to provide a single-step installation method for large format ceramic tile and stone. It fully supports heavy tiles and stone, reducing lippage problems and the need for leveling or pre-floating rough surfaces.

Applications

  1. Plumb and true masonry, concrete, mortar beds, cement backerboards, Portland cement plaster, drywall, existing ceramic tile, exterior grade plywood, sheet vinyl flooring, VCT or plastic laminates
  2. Gauged or ungauged natural stone, vitreous, semi-vitreous or absorptive tile including ceramic, quarry, pavers, cement, porcelain, terrazzo
  3. Interior or exterior walls or countertop

Benefits

  • Can be built up to 3/4" without shrinkage or extended set times
  • Excellent impact resistance
  • Water cleanable
  • Requires no pre-tile soaking
  • Holds large stone in place in demanding vertical installation

TileSet 910

TileSet 910 An economical factory-blend of Portland cement, extenders and additives.
TileSet produces an excellent bond by use of the dry-set mortar method for the installation of ceramic tile.
Applicable ANSI Standards: A108.5, A108.1B, A118.1, A118.4

 

ThinSet 911
Thinset 911 is a factory blend of Portland cement, sand and a unique blend of special additives.
C-Cure Thinset 911 produces an excellent bond with greater coverage than conventional dry-set mortars for the installation of ceramic tile.

Applications:


Plumb and true masonry, Concrete, Gypsum board (dry interior walls only), Cementitious backer units, Cured Portland cement mortar beds, Brick, Ceramic tile, Marble,

Benefits

  • For service in residential and commercial use for both floor and wall installations
  • Has excellent water and impact resistance
  • Requires no soaking of tiles
  • Not affected by prolonged contact with water
  • Provides a permanent installation with higher bond strength

MultiSet 917


The economical polymer-modified dry-set mortar designed for the bonding of all types of tiles. It may be used for either walls or floors for both interior and exterior applications where a liquid latex-modified mortar is recommended.

MultiSet 917 is a blend of Portland cement, sand and special dry latex additives that significantly improve bond strength and freeze-thaw stability -- performance characteristics typically available only through the addition of liquid latex additives to dry-set mortar.
Applicable ANSI Standards: A108.5, A108.1B, A118.1, A118.4

Non-Shrink Grout
Rapid Crete Non-Shrink Grout Is a line of multipurpose, fast-setting cement products for general concrete repair, anchoring, industrial grouting, and formed work.

Rapid Crete is a high performance blend of rapid setting cement and s to portland cement repair materials and may be applied using similar methods.

Pro Red Waterproofing 963

PRO-RED® WATERPROOFING MEMBRANE 963 is a ready-to-use, elastomeric, waterproofing and crack prevention membrane for all interior or exterior commercial and residential tile and stone installations.
Easily applied with roller, trowel or sprayer producing a continuous moisture barrier with outstanding adhesion.
Reduces crack transmission in ceramic tile or stone floors.
Meets ANSI A118.10 for waterproofing membranes and ANSI A118.12 for crack isolation membranes.
Meets Uniform Plumbing Code specifications for use as a shower pan liner.
Listed with IAPMO R & T,
File #4244 UPC®. ICC-ES ER-6014. Can also be
used as a slab-on-grade moisture barrier under resilient flooring.
For instructions for use as a slab-on-grade moisture barrier for resilient flooring installations, refer to C-Cure’s technical bulletin #121

TI-ProBoard WaterProof membrane Board

Place TI.PROBOARD™on the joists. Screw the first TI-Proboard (with the slot) in from the edge of the deck frame. It is Very important to make sure the first board is stright and square. Measure and use a chalk line. Continue by interlocking each board to the next, and screw TI.PROBOARD™down on each joist.

C-Cure PermaBond Ultra Mastic

PERMABOND® ULTRA 1002 is a superior strength adhesive composed of the highest quality organic resins and latexes. It has been formulated to perform equally well for both wall and floor tile installations.

 

C-Cure Frequently Asked Questions

C-Cure Frequently Asked Questions - All you questions about Thinset, Mortar, Grout and caulking

 

C-Cure Frequently Asked Questions

Grouts and Caulking Links
C-Cure Sanded Grout - C-Cure Non-Sanded Grout - C-Cure Caulking - Grouting Data Sheet

Waterproofing links
Pro Red Waterproofing 963 - SealGuard Waterproofing

Misc Setting Material Links
 C-Cure MultiSet 917 - C-Cure Thinset 911 - C-Cure Thinset 910 - C-Cure Pro Full Contact 907 - Pro-Set Thinset - PermaBond FastSet 904 - PermaBond Ultra Mastic 1002 - Dry-Set Mortars Coverage - Non Shrink Grout



This page was created by tiledepot you may view it for personal use only,
and for flooringsupplyshop.com customers only. DO NOT copy for commercial use. copyright material of www.flooringsupplyshop.com & International Flooring Center, inc.