Installation Two Substrate Layers 1. Draw level pencil line on outside substrate layer. 2. Place bottom of niche centered on the line and trace outline of niche back. 3. Cut through both layers along line and remove panel. 4. Place niche into opening and trace exterior flange. 5. Remove niche, cut through outside layer only and remove "picture frame" outline. 6. Set in place using Latex Polymer Liquid Waterproof Membrane.
Installation One Substrate Layer 1. Draw level pencil line on outside substrate layer. 2. Place niche with the bottom flange of the box centered on the level line. 3. Trace exterior flanges. 4. Cut along line and remove panel. 5. Caulk to cross bracing studs using Latex Polymer Liquid Waterproof Membrane. PreFormed™ Niches Installation: New Construction 1. Position Niche and mark the top and bottom of the flange between two studs ( located 16” O.C.) 2. Nail two horizontal braces between vertical studs. 3. Caulk to cross bracing studs using latex Polymer Liquid Waterproof Membrane 4. Install waterproof membrane behind the backer board. 5. Cover the joint and seal all edges between the niche and the backer board with fiberglass mesh embedded in latex polymer liquid waterproof membrane Latex Polymer Liquid Waterproof Membrane. PreFormed™ Niches PreFormed Tile ReadyProduct Line WarrantyFin Pan, Inc. Warrants for a period of thirty five (35) years that PreFormed Tile Ready products meet or exceed applicable manufacturing standards in force at the time of manufacture. Fin Pan Will, at its option, repairs or replaces any product which proves defective due to manufacturing. THERE ARE NO WARRANTIES OR GUARANTEES WHICH EXTEND BEYOND THE DESCRIPTION SET FORTH IN THIS WARRANTY AGREEMENT. THE REMEDIES STATED HEREIN ARE EXCLUSIVE REMEDIES AND FIN PAN SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY INDIRECT CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FURTHER LOSS OF ANY KIND WHATSOEVER, INCLUDING, BUT NOT LIMITED TO, DAMAGE TO THE BUILDING IN WHICH THE COMPONENTS ARE SITUATED, DAMAGE TO THE CONTENTS THEREOF, OR TO ANY OTHER PROPERTY OR PERSONS. This warranty shall apply only if the product is used strictly according to applicable specifications, and/or instructions provided by Fin Pan for its use. Fin Pan shall not be liable otherwise. |
**PreFormed Component’s Warranty will be voided if pan is modified on the jobsite. |
PreFormed Shower Pan - PreFormed Slope - PreFormed Niches - PreFormed Shower Seats - PreFormed Curb - Pro Board Backer Board - Pro Board Board Installation - Pro Board Backer Board MSDS - This page was created by tiledepot you may view it for personal use only, |
and for flooringsupplyshop.com customers only. DO NOT copy for commercial use. copyright material of www.flooringsupplyshop.com & International Flooring Center, inc. |